Marvin Hinged Door Hardware, Trim & Parts
Sale
Marvin Mortise Lock Active Multi-Point Lock Body Fits Marvin Ultimate Inswing Doors
Marvin Ultimate Inswing doors manufactured 1/17/2000 to present.Active Multi-Point lock body, used with Concealed Rods that screw into top and bottom.DOES NOT include rods, lock case only. American 5 pin cylinderHandle Spacing: 3-5/8 inch (92mm)Backset: 2-3/8 inch (60mm) with faceplate (measures 2-5/16 as...
$160.00
$136.76
Marvin Thumb turn Only, Hinged Patio door hardware
item # 14570 Marvin thumb turn for Hinged Patio Door is available in 10 finishes Thumb turn with tail piece, bushing and push nut included. Priced and sold each. Shaft Diameter: 3/8" .377" Actual Material: Solid Brass Color...
from $27.60
Spindle, 2-1/4 door, 5/16 Dia, 4-5/8 length 2- Piece
Two piece split shaft spindle for 2-1/4 inch thick doors.Also used with 3/8 inch Handle Extensions on 1-3/4 inch thick doorsFits: Marvin, Jeldwen, Cardaco and other doors Length: 4-5/8 inch (118 mm)Diameter: 5/16 inch (8 mm) Fits: 2-1/4 inch (57...
$8.25
Keyed Cylinder, Active Hinged 1-3/4 door (SCHLAGE C) - Brass
Keyed American Cylinder Fits 1-3/4" thick panel doors Keyed to Schlage C Brass face finish Priced and sold each
$39.95
Nylon washer for Marvin Thumb Turn
Marvin Nylon washer for Thumb Turn. Used with Push nut to hold thumb turn on Escutcheon Plate. Washer: 5/8 diameter x 1/8” thick Marvin Trim Parts - Sold individually 14570 - Thumb turn only # 00143045 - Washer for thumb...
$2.95
Marvin Strike Plate, Active Panel, Extended Lip - Choose Color
Marvin Strike Plate for Active panel, 2 panel door Long Extended lip Strike plate Strike plate width: 2-1/16 inchNote: Inactive door has a shorter lipMarvin Doors 9/25/2000 - PresentMade by Amerock for MarvinInstallation Screws #8 x 1 Phillips flat head wood...
from $71.17
Marvin Square Spindle, 5/16" x 4-1/2" (8mm x 115mm)
Solid spindle for Marvin Integrity hinged door handle sets (Cambridge and Northfield)5/16" x 4-1/2" (8mm x 115m)Priced and sold as each
55-303-115Can be replaced with 9-26874-56-0-1 or 517565 or 518982
$12.74
Marvin Patio Door Thumb Turn
Part Number : 14569
Marvin Patio Door Thumb Turn
Thumb turn only. No tail piece, bushing or push nut.Shaft Diameter: 3/8 Inch, .377 Inch Actual Material: Solid BrassColor Option: Oil Rubbed Bronze PVDPriced and sold each
$79.96
Marvin Strike Plate, Inactive Panel, Short Lip
Marvin Strike Plate for inactive door panel Note: looks like Active single door, but has a shorter lip Marvin Doors 9/25/2000 - Present Strike plate width: 1-1/2 inch wide ( inside to outside ) Strike Plate Length: 11 inches...
from $30.26
Marvin Face Plate Cover Active Panel 7/8" x 11" Face Plate Choose Color
Marvin Lock cover plate, Active Panel, Hinged Patio Door 7/8 x 11 Marvin face plate lock cover fits over single point and multipoint locks with concealed rods. Typically found on locks used by Marvin, Caradco, Jeldwen and others...
from $19.95
Keyed Cylinder, Active Hinged 2-1/4 door (SCHLAGE C) - Chrome
Keyed CylinderFits 2-1/4" thick panel doorsKeyed to Schlage CChrome face finishPriced and sold each.
$37.59
Z-Clip for Key Cylinder - Sliding Door Handleset Lock
Z-Clip for Key Cylinder, Sliding Door handleset lockWorks on: Marvin, Caradco, Jeld-Wen, Ashland and other handlesets to hold cylinder in placeSold Each - Clip only, no screw, no cylinderInstallation Note:The cylinder has to be seated properly ( Straight - not...
$1.24
Mortsie Lock Single Point Active 60mm Backset Marvin, Caradco, Jeldwen doors
SKU: 40160 Single point active lock (SPL) for Marvin Ultimate and other inswing doorsmanufactured 1/17/2000 to present.For mortise lock faceplate, see part # 395040Lock Body Type: American cylinderHandle spacing: 3-5/8 inch (92 mm) Center of handle to center of cylinderBackset: 2-3/8 inch...
$98.72
Marvin Tail Piece with roll pin ( Actuator) - 05570548
Part Number: 05570548 Product Type: Actuator with Rol-Pin Application: Outswing Bi-Fold Door – Traditional Handle system Usage: Internal actuator component used within the handle/lock mechanism Compatibility: For units manufactured 9/25/2000 – Present Function: Transfers motion within the locking system to...
$15.99
Marvin Push Nut Used on Ultimate Sliding French Door
Marvin push nut used on Ultimate Sliding French Door Handle Marvin Trim Parts - Sold individually # 14570 - Thumb turn only, Polished Brass (Marvin part #00142054)
$2.82
Fixing Plate - Convert Passive to Dummy
Fixing Plate - Convert Passive levers to Dummy fixed levers on Ashland HardwareUsed by Marvin, Milgard and othersPlate fits into the escutcheon plate and holds the levers rigidPlate Size: 1-9/32 x 1-9/16 inch SquareSpindle Hole Diameter: 5/16 inch SquareMarkings: C-5200,...
$4.68
Marvin Active Strike Plate Panel Single Door Jamb
Marvin Strike Plate, Single door Jamb application, Outswing French Doors Marvin: Strike, PNL, OFD, Normally used on Single 1 panel doors Date: 1/17/2000 - Present Made by Amerock for Marvin Installation Screws #8 x 1 Phillips flat head wood...
from $69.95
Marvin Jamb Strike Plate, Active Panel
Marvin Strike Plate, door Jamb application, Outswing DoorsNormally used on Single 1 panel doors Date: 1/17/2000 - PresentMade by Truth for MarvinInstallation Screws #8 x 1 Phillips flat head wood screws ( not included )Available Colors:05700016 - Stainless Steel05700012 - Antique...
from $62.84
Head-Foot or Jamb Flush Bolt - Solid Brass
Marvin Head or Foot Flush Bolt, Wood in-swing arch top combination door parts.Wood ultimate in-swing French door.Combination door parts 1993-present wood in swing French door 5/98 2005Length: 6-3/8 inch (162.5mm)Width: 5/8 inch (16mm)Depth: 1/2 inch (12.9mm)Bolt Projection: 9/16 inch (14mm)Bolt...
$40.80
Top Brands
