Active Sliding Patio Door L-Handle , Fuhr 574 / 392
Part Number: 40254 Hoppe / Fuhr L-type handle for active sliding patio doors with keyed cylinder. Used with Fuhr multipoint sliding door lock with 3 hooks. Handle Design: 574; L-Shape FUHR MASSIV 392 backplate screw hole pattern: 8-3/16 inches (distance from center...
Active Sliding Patio Door L-Handle - Oil Rubbed Brass
Part Number: 40254-ORBR Hoppe/Fuhr L-type handle trim handle set for active sliding patio door with keyed cylinder. Used with Fuhr multipoint sliding door lock with 3 hooks. Handle Design: 574; L-Shape Fuhr 392 backplate. Screw hole pattern: 8-3/16 inches, center of...
Blemished - Active Sliding Patio Door L-Handle - Oil Rubbed Brass
Part Number: 8764935-ORBR-BLEM Hoppe has Discontinued the 374N Backplate Fuhr Sliding Patio Door L-Type Handle for Active Door - Oil Rubbed Brass. Used with Multi-point Lock with 3 Hooks. Handle Design M574 / 374 Back Plate Handle to Cylinder- Center: 4-3/4...
Dummy Pair, Sliding Patio Door L- Handle, Fuhr 574 / 392
Part Number: 40257 FUHR MASSIV M574 392 F73 DP M574 RH ST : Antique Brass (F73) PAIR Dummy Handle Set for Sliding doors. Fuhr Sliding Glass Door Trim used on Passive / Inactive door. It is a replacement for old Fuhr...
Fuhr Hoppe Full Cylinder 8787819
Stamped CES on exterior cylinder. Distance A Outside Distance B Typical Panel Thickness (inches) Resista Brass (F77-R) Polished Chrome (F49-R) Brushed Chrome (F41-R) Satin Nickel (F42-R) Antique Nickel (F44-R) 31.5 31.5 1-3/4" 8787819 3141925 3141909 3141917 3142629
Fuhr Multi-Point Lock, 3 Hooks, 28mm - 6-8 Sliding Door
Part Number: 40211 Fuhr inline-gear multipoint lock (2 or 3 piece lock case). For 6-foot 8-inch active sliding patio door. Spindle Diameter: 5/16 inch (8 mm) Gear section: 5/8 inches wide x 61-3/4 inches long. Three hooks located 11-3/4 & 27-1/2 from the bottom...
Fuhr Multi-Point Lock, 3 Hooks, 35mm 8785527
Part Number: 40213 Multipoint Fuhr sliding patio door lock with 3 hooks for 6-foot 8-inch Door. Face Plate Measurements: 5/8 Wide x 64-5/8 inches long. Hooks: three hooks, two below the handle, one above. Bottom Hooks Located: 8-1/2 & 24-1/4 inches from...
Fuhr Sliding Door Strike Plate, 16mm Flat Square Ends No Dimple- Zdi Zinc Dichromate
Part Number: 3529997 Fuhr Flat strike plate for Inline sliding door with 3 hooks. There are 5 different Strikes. Strike Type: Flat, Square ends with NO dimple for auto release Strike Shape: Flat Strike Plate Width: 5/8 inch (16mm) Screw holes...
Fuhr Sliding Door Strike Plate, 16mm Flat Square Ends W/ Dimple- Ydi Yellow Dichromate
Part Number: 8785635 / 850-8785635 DISCONTINUED Fuhr Flat strike plate for Inline sliding door with 3 hooks Strike Type: Square ends Sh dimple for auto release Strike Shape: Flat Strike Plate Width: 5/8 inch (16mm) Screw holes in strike: 10 Overall...