Storefront Door Locks
Faceplate, Deadbolt Radius W/ Weatherstrip Commercial Doors Parts - 380034
- Aluminum
Part Number: 380034
Length: 6-7/8\''
Width: 1\''
Top Screw Hole Spacing: 2\''
Bottom Screw Hole Spacing: 3-5/8\''
$4.95
Bottom Rail Lock, 1-9/16" For Glass Doors - 380078
Part Number: 380078
Bottom rail lock used on glass doors.
BRL-03
1-9/16"
Priced and sold each.
$28.95
Bottom Rail Lock, 1-7/8" For Glass Doors - 380079
Part Number: 380079
Bottom rail lock used on glass doors.
BRL-01
1-7/8"
Priced and sold each.
$29.95
Latch Shield, 6", Steel, Brass Plated, 2-Piece Shield - Polished Brass - 44456
Part Number: 44456 Latch Guard Covers Hinged door spring latch or deadbolt lock Helps Protect out swinging door from forced entry. application: residential and commercial doors Width: 3" Length: 7" Offset: 1/4" Hole Center to Center: 5-15/16" Material: Steel Color: Grey...
$10.99
Latch Shield, 3" X 7", Steel - 44455
- Bronze
Part Number: 44455 Latch Guard Covers Hinged door spring latch or deadbolt lock Helps Protect out swinging door from forced entry. application: residential and commercial doors Width: 3" Length: 7" Offset: 1/4" Hole Center to Center: 5-15/16" Material: Steel Color: Grey...
from $9.00
Adjustable Spring-Loaded Cylinder Trim Ring - 380184
- Antique Brass
Part Number: 380184 Adjustable Spring Loaded Cylinder Ring in Aluminum. This spring type cylinder collar is adjustable. Spring inside Adapter Ring compensates and prevents rattle. Cylinder face is recessed when installed and the ring is free-spinning, so the cylinder cannot be...
$6.25
Deadlatch Lock 1-1/8 Kit With Faceplate And Strike Plates - Aluminum Finish - 380121-Al
Part Number: 380121-AL
Kit includes:
Deadlatch, 1-1/8" backset with spring loaded latch
Faceplate, Non-Handed with weatherstrip on one edge
Double Hole Strike plate
Installation Back plate with screws
Dustcap, Black
$32.50
Deadlatch, Exit Door, 1-1/8 Backset, Flat Faceplate - 380068
- Aluminum
Part Number: 380068 Deadlatch Mortise Lock for store front aluminum narrow style doors Steel construction Spring latch lock for commercial doors Steel construction Dead Latch lock for commercial storefront doorsuse Latch goes out 3/4 inch Deadlatch may allow exit only Commonly...
$27.50
Left Hand Small Hole Hookbolt Face Plate, Bevel - 380037-L
- Aluminum
Part Number: 380037-L
Face plate designed for Hookbolt and left hand bevel stile configuration.
$4.00
Hookbolt Lock, Radius Face Plate With Mohair Weatherstrip - 380040
- Aluminum
Part Number: 380040
Clear anodized or bronze finished aluminum faceplates
Mohair pile weatherstripe radiused
Material: Aluminum
Color: Duranodic Bronze or Aluminum
Width: 1 inch
Height: 6-7/8 inch
$5.75
Hookbolt Mortise Lock 31/32 Backset, W/ Faceplate - 380062
- Aluminum
Part Number: 380062 Hookbolt Mortise Lock for narrow stile sliding doors Steel construction swing hook lock for commercial sliding storefront doors or hinged doors Description: Mortise Deadlock, 31/32 inch Backset, Steel, Aluminum Finish Material: Steel Faceplate Color: Aluminum Available in Bronze...
$27.50
Right Hand Small Hole Hookbolt Face Plate - 380038-R
- Aluminum
Part Number: 380038-R
Face plate designed for Hookbolt and right hand bevel stile configuration.
$4.00
Deadbolt Latch, 1-1/2" Mortise Lock - No Face Plate - 380018
Part Number: 380018 Dead bolt lock with 1-1/2 inch back set, for use with narrow stile front commercial doors. A laminated steel bolt activated by pivot mechanism provides maximum security door.Specifications: Lock Backset 1-1/2 inch Hand: Non handed, easily reversible Case...
$19.95
Cylinder Guard, Mortise 3/4 Inch Thick Aluminum - 380182
- Aluminum
Part Number: 380182 Secures any 1-5/32 inch diameter cylinder from twist-off or pry-off break in attempt cylinder guards protects cylinder face from prying tool Also spins freely when attacked by any gripping device. Material: Diecast Color: Aluminum or Bronze Diameter: 1-5/16...
$12.69
Deadlatch, Exit Door, 31/32 Backset, Lh W/ Flat Faceplate - 380067
- Aluminum
Part Number: 380067 Deadlatch Mortise Lock for store front aluminum narrow style doors Steel construction Spring latch lock for commercial doors Steel construction Dead Latch lock for commercial storefront doors use Spring Latch Extends 3/4'' Deadlatch may allow exit only Commonly...
$27.50
Commercial Doors Push / Pull Exit Paddle, Lh - 380023
- Aluminum
Part Number: 380023 Commercial Doors Push / Pull Lever Handle / Exit Paddle - 2 colors This exit paddle is used with Deadlatch version ( Spring Latch ) Mortise lock. Handing can be easily changed by removing C-clip and flipping cam...
from $29.95
Commercial Door Latch Shield 3-5/16" X 12" - Grey - 380088
Part Number: 380088
Commercial Door Latch Shield
3-5/16" x 12"
Grey
Includes mounting bolts
Non-handed
Fits narrow stile aluminum doors
Tamper-proof
$12.95
Adams-Rite 1" Dummy Mortise Cylinder, Zinc Construction - 380100
- Aluminum
Part Number: 380100 Single, NO KEY mortise cylinder; Commercial Store Front Glass Doors Normally used on interior side of door when key is not needed or wanted pressure cast zamac construction;Specifications Key: None - Dummy Cylinder Size: 1 inch length, standard...
$5.95
Deadlatch Lock 1-1/2 Mortise Lock, No Faceplate - 380069
Part Number: 380069 Deadlatch Mortise Lock for store front aluminum narrow style doors Steel construction Spring latch lock for commercial doors Dead Latch lock for commercial storefront doors Commonly used for traffic control after hours or when someone wants door to...
$19.95
Hookbolt Latch, 1-1/2" Mortise Lock, - No Face Plate - 380054
Part Number: 380054 Hook bolt mortise lock for narrow stile sliding doors. steel construction swing hook lock for commercial sliding storefront doors or hinged doors.Specifications: Lock Backset 1-1/2 inch Hand: Non handed, easily reversible Case Dimensions: 7/8 inch W x 6...
$19.50
Faceplate Deadlatch Flat With Screws - 380042
- Aluminum
Part Number: 380042
Faceplate with Screws for Flat Deadlatch.
This Faceplate is designed for Deadlatch & Flat Stile configuration.
Available Colors: Aluminum and Duranodic Bronze.
Width: 1 Inch
Length: 6-7/8 Inch
Hole Center: 3-13/16 Inch
Color: Bronze or Aluminum
$2.00
Deadlatch Faceplate With Weatherstrip, Radius - 380046
- Aluminum
Part Number: 380046
Replacement Face plate designed for Commercial Deadbolt lock
Configuration: Fits flat stile
Width: 1 inch
Length: 6-7/8 inch
Cut-out for Bolt: 5/8 x 2-7/8 inch
Finish: Aluminum or Bronze
Includes: Faceplate and Screws
$9.00
Right Beveled Deadbolt Lock Faceplate - 380032
- Aluminum
Part Number: 380032
Commercial door Deadbolt lock faceplate
Configuration: Fits right hand bevel stile
Width: 1 inch
Length: 6-7/8 inch
Cut-out for Bolt: 5/8 x 2-7/8 inch
Includes: Faceplate and Screws
$9.00
Commercial Deadbolt, Replacement Deadlock, No Faceplate - 380074
Part Number: 380074 Deadbolt Mortise Lock Commercial Rectangular Deadbolt Handed: NO, Non-Handed Case dimensions: 7/8 Width x 5-1/2 Long overall x 1-5/8 Deep Latchbolt: 5/8 Width x 1-1/4 Length x 5/8 Throw Screw Holes: 5-1/8 center to center Backset: 31/32 inch...
$59.00
Deadlatch Lock, 31/32 Inch Backset, Reversable Handing - No Face Plate - 380055
Part Number: 380055 This item has Reversable Handing (left or right) Deadlatch Mortise Lock for store front aluminum narrow style doors Steel construction Spring latch lock for commercial doors Steel construction Dead Latch lock for commercial storefront doorsuse Spring Latch Extends...
$19.95
Commercial Deadbolt Lock Flat Faceplate - 380030
- Aluminum
Part Number: 380030
Replacement Face plate designed for Commercial Deadbolt lock
Configuration: Fits flat stile
Width: 1 inch
Length: 6-7/8 inch
Cut-out for Bolt: 5/8 x 2-7/8 inch
Finish: Aluminum or Bronze
Includes: Faceplate and Screws
$4.95
Amarlite Replacement Mortise Lock For Narrow Style Doors. - 380070
Part Number: 380070 56-886 Amarlite / GUARD Amarlock Replacement Lock for Narrow Style Doors. Unique, tele-scoping bolt-in-a-bolt, for a total throw of 1-1/4. Uses a 1-3/16 diameter cylinder. ( not Included ) Backset: 7/8 Case Size: 1-1/8 x 1-1/2 x 2-15/16 Bolt: ...
$70.00
Deadlatch Strike Plate, Commercial Store Front Doors, Double Hole - 380072
Part Number: 380072 Deadlatch Strike Plate for Commercial Store Front Doors, Double Hole Used on some applications Includes Strike plate, Backplate and screws Strike Plate: 1-7/8 x 4-5/8 Screw Holes @ 3-7/8 inch Backplate: 1-1/8 x 6-1/8 Screw Holes @ 5-3/8...
$9.95
Hookbolt Mortise Lock 1-1/8 In Backset, W/ Faceplate - Aluminum - 380063
- Aluminum
Part Number: 380063 Available Backsets: 7/8, 31/32, 1-1/8, 1-1/2 Hookbolt Mortise Lock w/ Radius Faceplate Steel construction swing hook lock for commercial doors Steel construction swing hook lock for commercial sliding storefront doors.use Available in Bronze and Aluminum Description: Mortise Deadlock,...
$27.50
Deadbolt Lock, 1-1/8 Inch Backset - No Face Plate - 380051
Part Number: 380051 A laminated steel bolt activated by pivot mechanism provides maximum security door. Description: Door Lock Deadbolt, 1-1/8 inch Backset, Steel housing Laminated steel bolt, Activated by a pivot mechanism Provides maximum security for any single hinged door Faceplate...
$19.95
Top Brands
