Multipoint Locks
Sale
GU Cremona Active Gear w/ Shootbolt 854-10900
Cremona Active gear shootbolt. Color Silver. 50/92 8-16-889-1900 US Handle Height: 35 inches Backset Options: 30mm, 35mm, 40mm, 45mm, 50mm, 55mm Standard Backsets: 1-3/8 Inch (35mm), 1-3/4 inch (45mm), 2 inch ( 50mm) Special Backsets: 30 mm, 40 mm, 55 mm...
$479.00
$364.97
G-U / Ferco 2-1/4 door (57mm) Cylinder Tail Piece
Part Number: 9-C0975-64-0-BLPC Discontinued, no longer available. Use 9-C0975-90-0-6 as replacement. Replacement part for American style keyed cylinder with flat tail pieceDoor Thickness: 2-1/4 inch (57mm)Length: 2-1/2 inch (64mm) long.Break away score marks at 3/8 inch, then 1/4 inch increments for thinner...
$2.95
Marvin Passive 57/92 multi-point door lock - SS
Marvin Passive Multi-Point lock body, used with Concealed Rods that screw into top and bottom.Application: Marvin Ultimate inswing double French doors manufactured 1/17/2000 to present.Version: Concealed Rod Key Cylinder: No cylinder on passive lock body.Handle spacing PZ: 3-5/8 inch (92mm).Backset:...
$96.33
Sale
Hoppe 16mm Manual Gear, 35/92 Shootbolt, 1" Deadbolt, 39.62 Handle Height
Manual Shootbolt Hoppe Gear Manual version engages multipoint when door handle is lifted.Added vertical strength is a proven benefit of the shootbolt version providing extra security through the locking points in the head and sill of the door. Hoppe Bottom Gear,...
$186.28
$172.94
HOPPE Multipoint Lock Assembly, 1-3/4" Backset, Bottom Tongue @ 24.41", Top @ 23.62"
Peachtree Hinged door with Hoppe Multipoint Lock3-point lock features Deadbolt and 2 locking tonguesFaceplate Width: .63 inch (16mm),Backset: 1.75 inch (45mm),Deadbolt throw: 1.00 inches. (25.4mm)Handle Height: 36.00 inch (914mm),Bottom Tongue Position: 24.41 inches (620mm)Top Tongue Position: 23.62" (600mm)Maximum Cutoff : 6.30...
$295.00
20MM MANUAL 45/92 GEAR, TONGUE @ 26.42", 1/2" D/B, 36" HH
HOPPE HLS9000 3/4 inch faceplate multipoint lock with manual gear, tongue version for active door with 1/2" Deadbolt throw locks, are normally, for narrow stile aluminum doors with aluminum jambsSpecifications:Faceplate Width: 3/4 inch (20mm) 0.787Backset: 1.77" (45mm),Deadbolt Throw: .55" (14mm)Handle...
$209.77
Interlock Optimum 30mm Lock Body, 2-Point - Stainless Steel
Interlock Optimum hinged door 2-point mortise lock 1-3/16 inch backsetUsed by many aluminum door manufacturers, and to replace damaged or missing mortise lock in hinged doors. .When deadbolt is extended the spring latch becomes rigid and creates another locking point.Model:...
$122.60
HLS7 16mm Active Gear, 45/92, LH Tongue @ 24.41 Hoppe Part #2661101
All HLS 7 locks have the same backsets and are handed for Left or Right hand doors. Handing can be changed if needed. Hoppe Series: HLS 7 (one motion retracts deadbolt with turn of handle) Hoppe Version: Tongue @ 24.41" (620mm)Backset: 1-3/4...
$224.24
Ferco BKS Knob Cylinder Normal 8806N Size: Z31-K60 3 keys different
Article number : B88060020
Profile knob cylinder 8806 N
length A (external ) : 31mm
length B (internal) : 60 mm
Designation : knob cylinder• Matt nickel-plated brass• Cylinder with 3 keys• 5 pin tumblers
Door fitting, Door technology
$175.00
Sale
TEDEE PRO Smart Lock for European Multipoint Locks
Part Number : 6-C9370-00-0 Tedee Pro is your Smart Lock option to keys for Multpoint lock system and European style locks. Unlock your door with a smartphone and enjoy automatic locking and unlocking. The Tedee app lets you issue Virtual Keys allowing...
$750.00
$442.50
SET OF 3 STRIKE PLATES
Set of 3 Strike Plates Part Number: 37400109 This set of Strike Plates was used on old Peachtree Citadel IPD French Hinged Doors, Pella Entry Doors, Trilennium Locks and Others The Strike set has curved lips and will fit 1-3/4 inch...
from $12.38
EURO MORTISE LOCK CASE, ACTIVE 35/92 GEAR, OLD STYLE REPLACEMENT
Part Number: 40148 G-U 35/92 Lock case, Old Style ReplacementMortise Lock Type: Euro, Uses a Profile cylinderFaceplate: None, Lock case onlyBackset: 1-3/8" (35mm)Handle PZ: 3-5/8" (92mm)Spindle: 5/16" ( 8mm)Operation: Lift LeverNote: This will only work on the OLD STYLE Multipoint locks with...
$135.00
Sale
$279.00
from $162.67
G-U VENICE HANDLE & 45MM PLATE, ZAMAC, ACTIVE, KEY & THUMBTURN (HANDLE BELOW CYLINDER) CHOOSE COLOR
Part Number: K-U7692-Z1-0-ACTB This is the G-U Venice Collection of Multipoint Lock Hardware Trim in 3 colors.It replaces the Belissimo 4100 and 5100 series collection.The Venice series can be used with these G-U manufactured mortise locks:Tripact, Europa, Cremona, and Secury Automatic...
$279.00
from $162.67
UNIVERSAL ACTUATOR CONVERSION KIT FOR 2-3/4" DOORS - STEEL
Part Number: K-C2054-70-0-6
G-U Ferco Conversion Kit for 2-3/4" Thick Doors with Gripset HandlesContents:ActuatorCylinder with long tail pieceM5 x 90mm Installation screws (2)M5 x 75mm Bottom screw
$90.65
Schlage Cylinder Lock with 3-1/2" (90mm) Tail
Part Number: 6-C0971-90-0
G-U 5 Pin Keyed Cylinder with Extra Long tail piece for use with 3 inch thick doors or Danalock Inside Thumb turn.Cylinder: 5 Pin, Schlage "C" Keyway Tail Piece Length: 3.543 (90mm) Keys: 2
Color: Black or Chrome, zinc plated.
from $28.38
from $221.59
G-U CAPRI HANDLE & 45MM PLATE, DUMMY, NO KEY, NO THUMBTURN (HANDLES DO NOT MOVE) CHOOSE COLOR
Part Number: K-U6210-00-0-DUMNKNT This is the G-U Capri Collection of Multipoint Lock Hardware Trim in 7 colors.It replaces the Belissimo 4100 and 5100 series collection.The Capri series can be used with these G-U manufactured mortise locks:Tripact, Europa, Cremona, and Secury...
from $221.59
MULTIPOINT TRIM, 2 X 10-1/2 INCH, AMERICAN CYLINDER TRADITIONAL BRASS HANDLESET - 921102000
Replacement multi-point lock handle set trim in traditional brass.Part Number: 921652000Carefully check your measurements to reduce chances of error.If your door has a different screw hole pattern, a new pattern may still work by drilling new screw holes.Be sure the...
$273.00
SHOOTBOLT 500MM EXTENSION FOR DOORS TALLER THAN 6 FOOT 8 INCHES
Part Number: G-16790-05-0 Shootbolt Extension, 500mm for doors greater than 81 inchesUsed with Pella, Atrium, Superior and othersFaceplate: 5/8 inch (16mm) - Available in stainless steel, Ferguard silver or blackExtension Length: 19-5/8 inches (500mm)Maximum Cutoff: 10 inches ( 250mm)Note: If door...
from $32.07
G-U MONOLOCK 45/92 EURO SINGLE POINT MORTISE LOCK (SPL) - STAINLESS STEEL
Part Number: 6-C4871-45-0-SS G-U 45/92 EURO Monolock door bolt mortise lock; Single Point Mortise lock with radius ends.Application: Single Point LockSeries: Key BELOW LeverBackset: 1-3/4 inch (45mm)Face Plate Width: 5/8 inches (16mm)Faceplate Length: 11-1/2 inches (292mm)Cylinder Type: Euro Profile, 5...
$207.67
Sale
16 MM MANUAL SHOOTBOLT GEAR, HOPPE 45/92MM, 36 INCH HANDLE HEIGHT - SS
Part Number: 8778331 Hoppe 16mm Faceplate Bottom Gear, HLS9000 Shootbolt Version, Manual Locking for Active Door. Function: Manual Locking, lift handle to engage shootbolts, turn thumb turn or key to secure in locked positionVersion: Manual Shootbolt, vertical locking boltFaceplate Width: 5/8" (16mm)Backset: 1.77" (45mm)Shootbolt Throw: 3/4"...
$250.00
$169.79
$295.00
HOPPE 3-POINT MULTIPOINT LOCK, DOOR HEIGHTS 79.57"- 83.50", 1-3/4" BACKSET, SHOOTBOLT VERSION
Part Number: 49902-1645SB-02-KIT Replacement Kit for a variety of Discontinued Multipoint locks on doors with Fuhr, Roto or other brands that are not available.Please confirm all measurements to be sure this is the correct replacement for your door.You will need...
$295.00
$295.00
HOPPE 3-POINT MULTIPOINT LOCK, DOOR HEIGHTS 79.57 - 83.50", 1-3/8" BACKSET, SHOOTBOLT VERSION
Part Number: 49902-1635SB-02-KIT Replacement Kit for a variety of Discontinued Multipoint locks on doors with Fuhr, Roto or other brands that are not available.Please confirm all measurements to be sure this is the correct replacement for your door.You will need...
$295.00
HOPPE HLS 9000 SLIDING DOOR HANDLE-SET, M574/2165N ACTIVE NON-KEYED, Oil Rubbed Brass
HOPPE HLS 9000 SLIDING DOOR HANDLE-SET, M574/2165N ACTIVE NON-KEYED Hoppe - New Style Sliding Door multipoint Lock Hardware Trim Handle set.Active / Non-Keyed Thumb-turn handle for Hoppe Multi-Point locking sliding doors with 2 hooks;M574 handles and 2165N interior and exterior...
$379.82
Sale
HOPPE HLS 9000 Sliding Door Handle Set Verona Lever Active Keyed Oil Rubbed Brass
HOPPE HLS 9000 SLIDING DOOR, VERONA M151VK/2170N ACTIVE KEYED Hoppe - New Style Sliding Door multipoint Lock Hardware Trim Handle set.Active / Keyed handle for Hoppe Multi-Point locking sliding doors with 2 hooks;M151 handles and 2170N interior and exterior back...
$511.00
$411.47
P2000 ACTIVE GEARBOX ONLY 35/92 AMERICAN CYLINDER
P2000 ACTIVE GEARBOX ONLY 35/92 AMERICAN CYLINDER. Part No: P2000-35LC. P2000 Active 35/92 Gearbox Only American Cylinder - No Faceplate Gearbox has a deadbolt and spring latch only - It is NOT a complete Multipoint lock (MPL) - CENTER LOCK...
$114.92
GIESSE DOOR WITH PERIMETER LOCK 45MM BACKSET, 85 PZ
GIESSE DOOR WITH PERIMETER LOCK 45MM BACKSET, 85 PZ. Part No: 04650000. Giesse Door with Perimeter Lock 1-3/4 backset, 3-5/16 Handle to Cylinder Centers. Giesse INOX Mortise lock case for Multipoint Lock used on Terrace or Balcony doors. Faceplate Width:...
$71.48
20mm Winkhaus Oml Replacement 45/92 P2000 76-1/4" Single Door
20MM WINKHAUS OML REPLACEMENT 45/92 P2000 76-1/4" SINGLE DOOR. Part No: 49906-2045H-201. This Winkhaus Multipoint lock Fits 76-1/4" Tall Doors Only This is a custom Replacement for the Winkhaus 1-3/4" thick, 76-1/4" Tall Door with Active Multipoint Lock. This is...
$285.00
from $459.74
TRILENNIUM 3070, 65-9/16, 8-0 DOOR, LEFT HAND IN SWING, 2-3/8 BACK SET, 7/8" FACE, NO STRIKES
- Victorian Bronze
TRILENNIUM 3070, 65-9/16, 8-0 DOOR, LEFT HAND IN SWING, 2-3/8 BACK SET, 7/8" FACE, NO STRIKES. Part No: 499130073. Brand: Trilennium . Trilennium 3070 series multipoint lock with locking latch bolts used by Pella and others. No Strike Plates, Lock assembly...
from $459.74
3000 Trilennium Multipoint Lock 6-8 Door Left Hand
- Bronze
3000 TRILENNIUM MULTIPOINT LOCK 6-8 DOOR LEFT HAND. Part No: 499130001. Brand: Pella. Trilennium 3000 series Multi-Point Lock with looking Latch Bolts - Multi-point lock Only IMPORTANT - all locks are set up for INSWING doors. If you have an...
from $400.00
Ipd Mortise Lock Faceplate - Polished Brass
IPD MORTISE LOCK FACEPLATE - POLISHED BRASS.
Part No: 37400080.
Brand: PEACHTREE.
IPD Mortise lock faceplate in polished brass.
Length: 11-5/16 Inch
Width: 3/4 Inch
Finish: Polished Brass
End Style: Radius
Contents: 1 Faceplate
Priced and sold each.
$54.95
Top Brands
