G-U / Ferco Handle Extensions & Spindles
SQUARE SPINDLE, 5/16" X 4-3/8 INCH (8MM X 110MM) 1-3/4 DOOR
Part Number: 9-U8100-10-0-8 8mm Square Spindle, 4-3/8 inch (110mm) Length Spindle Type: Split ShaftThe handle set screw goes into the split when installing.Fits Doors 1-3/4 - 2 inch thickMaterial: Steel Diameter: 5/16 inch (8mm) SquareLength: 4-3/8 Inch (110mm) 4.33 inchesUsed by GU,...
$7.97
SQUARE SPINDLE, 1/4" X 4-5/8 INCH ( 7MM X 118MM)
SQUARE SPINDLE, 5-3/16" X 1/4" (7MM X 131MM)
Part Number: 9-26874-56-0-FGSquare Spindle 1/4 x 4-5/8 (7mm x 118mm)Material: Steel Diameter: 1/4 inch (7mm) SquareLength: 4-5/8 Inch (118mm)
$3.53
SQUARE SPINDLE, 5-3/16" X 1/4" (7MM X 131MM)
SQUARE SPINDLE, 5-3/16" X 1/4" (7MM X 131MM) Part Number: 9-26874-69-0-FGSQUARE SPINDLE, 5-3/16" X 1/4" (7MM X 131MM) 5-3/16 Inch by 1/4 Inch Square Spindle.Spindle is for sashes that are 2-11/16 Inch to 3-1/8 Inch thick.Diameter: 1/4 inch (7mm)Length: 5-3/16...
$6.81
SQUARE SPINDLE, 1/4" X 4-5/8 INCH ( 7MM X 118MM)
Part Number: 9-26874-56-0-1
Square Spindle 1/4 x 4-5/8 (7mm x 118mm)
Material: Steel
Diameter: 1/4 inch (7mm) Square
Length: 4-5/8 Inch (118mm)
$3.53
8MM REDUCING SLEEVE
Part Number: E-91440-01-0-1 Reducing sleeve to convert 7mm spindle to 8mm Diameter:Can also be used to convert 8mm Handle hole to fit 7mm spindleMaterial: BrassLength: 1-3/16 inch longInside Diameter: 1/4 inch (7mm)Outside Diameter: 5/16 inch ( 8mm)Only one length availableNOTE:...
$16.95
SPINDLE, 5/16" X 5-1/8" (8MM X 130MM) 3" DOOR
Part Number: 9-U8100-30-0-8
G-U / Ferco Replacement Spindle for Connecting Handles
Spindle Type: Square w/ Split Shaft at ends
Fits Doors Up to 3 inch thick
Material: Steel
Diameter: 5/16 inch (8mm)
Length : 5-1/8 inch (130mm)
$4.81
SQUARE SPINDLE, 5-3/16" X 1/4" (7MM X 131MM)
Part Number: 9-26874-69-0-1
5-3/16 Inch by 1/4 Inch Square Spindle.
Spindle is for sashes that are 2-11/16 Inch to 3-1/8 Inch thick.
Diameter: 1/4 inch (7mm)
Length: 5-3/16 Inch (131.76mm)
Material: Steel
Priced and Sold Each.
$6.81
G-U / FERCO 3/4" HANDLE EXTENSION, NEW STYLE - PPST 2012
Part Number: 9-C0695-00-0 New Style Handle Extender for G-U Ferco hardware from 2012 to presentThe new style handle extensions work with the Black Plastic Snap Ring that comes with Handle Set TrimA longer Spindle may be needed to connect levers...
from $15.78
CONSTRUCTION KEY, 7MM, 8MM, 10MM SPINDLE AND KEY SLOT TOOL
Part Number: 9-U0001-01-0-0 Contractor handle for Repair, Replacement or New Construction when working with Multipoint Locks. This handy new construction or remodeling tool is a must when working on all brands of Multipoint locks. Can operate lock before installing handle set...
$11.47
Top Brands
