Ferco - GU
Sale
RHINO 50/92 ACTIVE 3-POINT HOOK BOLT , G-U / FERCO - SILVER FERGUARD
Part Number: 6-33440-01-0-FG G-U Secury Multi-point LockEuropa Rhino Hookbolt 3 point lock system; Key Below Handle, Backset: 2 inch ( 50mm)Faceplate Width: 5/8 inch (16mm)Faceplate Finish: Silver FerguardHandle / Cylinder PZ: 3-5/8 inches ( 92mm)Spindle: 5/16 inch (8mm) SquareHandle Height:...
$450.00
$365.99
SHOOTBOLT 500MM EXTENSION FOR DOORS TALLER THAN 6 FOOT 8 INCHES
Part Number: G-16790-05-0 Shootbolt Extension, 500mm for doors greater than 81 inchesUsed with Pella, Atrium, Superior and othersFaceplate: 5/8 inch (16mm) - Available in stainless steel, Ferguard silver or blackExtension Length: 19-5/8 inches (500mm)Maximum Cutoff: 10 inches ( 250mm)Note: If door...
from $32.07
SECURY AUTOMATIC MULTIPOINT LOCK, KEY OPERATED, 65/92 GEAR DRIVEN 6-8 DOOR
Part Number: 6-40526-08-R-SS GU Secury Automatic European Profile cylinder key operated, gear driven lock.Use your key or thumb turn to lock and unlock door, Levers are not needed.Used for a clean modern looking door, Optional Push / Pull bars and...
$739.81
Interchangeable Latch 854-15808
Interchangeable Latch 854-15808
GU Interchangeable Latch piece 854-15808.GU part number: 6-28902-01-0-1.Special order. Min order of 2.Model: 854-15808
$30.89
Capri Semi-Active Black Handle Set, 854-16087
Black Powder Coat GU Capri Semi-Active set. Unassembled kit for 1 3/4" thick doors Zamac trim sets Stainless Steel set screw on levers to secure spindle 90° locking with thumb-turn Self-centering spindle Use with mortise lock, SECURY S2, SH2and SECURY...
$184.56
G-U Capri Handle and 45 mm Plate Series, Zamac, Active, 854-15824
Capri Active Dark Bronze Handle Set 854-15824 GU Capri Active set Dark Bronze Powder Coat Unassembled kit for 1 3/4" thick doors Zamac trim sets Stainless Steel set screw on levers to secure spindle 90° locking with thumb-turn Self-centering spindle...
$199.95
Sale
Ferco GU Top Extension 500mm
GU Top Extension 500mm G-16790-05-0-1R
Ferco-GU Top Extension 500mm Cremona 19 11/16 inches length.
GU Part number: G-16790-05-0-1R
Model No: 854-14412.
Top Extension 500mm Silver FG
$47.99
$45.25
Adjustable Electric Strike Fail Secure, Faceplate 1-1/4 x 5-7/8, Off Center Stainless Steel 8-16V AC/DC
Part Number: ES-17.610-73G35R11 Fit for: new / replaced aluminum & metal door frame For use with: locksets having up to 5/8” throw, based on 1/8” door gap Mul-T-Lock electric strikes are designed with an adjustable keeper to simplify the installation. The latch...
$151.31
Strike Plate, Latch & Deadbolt, Raised Left Hand
Part Number: 6-38678-09-L-FG G-U Ferco raised latch and deadbolt door strike 25/32 x 9-3/16" Left HandWidth: 25/32 (20mm) 0.788Length: 9-3/16 inch (233mm) 9.173Height: 7/16 inch (11mm) 0.433Handed: Yes, As Shown Material: Steel and plastic Finish: Silver Ferguard Markings on Metal: 9-38941-01 9 389420 1B 46639-38942-03 9-38941-02Marking...
$68.43
GU Ferco Sliding Door Roller Pair Front and Rear Sliding Door Runners with Rollers
Part Number: K-16488-00-0-FG G.U. Hardware G.U-934 Sliding Door Runners with RollersManufacturer: G.U. HardwareModel: K-16488-00-0-1Description: Front and Rear Runners for Sliding DoorsRunner Width: 5/8 inchRear Runner Length: 9 inchFront Runner Length: 12.5 inch Weight Capacity: 300lb per panelCondition: New Lift and slide...
$349.97
Cremona 35/92 Active Shootbolt, 3 Point lock - Black
Part Number: 6-33244-01-0-BL Active Gear Only with Bottom Shoot-bolt - Needs top shootbolt and middle extension for doors greater than 81"G-U Cremona 3 Point Door Locking Gear with Bottom Shoot-bolt attached(does not include top Shootbolt or middle extension) - SOLD Separately Series:...
$287.99
Sale
16mm Fuhr Hook Version 3-Point Lock, 1-3/4" Backset, 91" Length
Part Number: 49901-1645H-03 Fuhr Multisafe Manual Gear with 2 hooks 91-1/16" DoorManual One-Piece System with Gear and Top Extension attachedFuhr hook version multipoint lock, Stainless Steel faceplate, deadbolt and 2 hooks.Fuhr Measurements:Face Plate Width: 5/8 inch (16 mm)Lock Backset 1-3/4 inches (45 mm)Handle to cylinder PZ: 3-5/8...
$550.00
$283.71
16mm FUHR hook 45/92, BH 26-1/8, TH 32-3/4 Door 82-9/16" - SS Hoppe #8787463
Fuhr Multisafe Manual Gear with 2 hooks 82-9/16" DoorManual One-Piece System with Gear and Top Extension attachedApplication: Special Size, FUHR replacementBackset: 1-3/4 inch (45mm)Deadbolt Throw: 1 inch ( 25.4mm)Faceplate Width: 5/8 inch (16mm)Handle to cylinder PZ: 3-5/8 inch (92mm)Cylinder Type: Euro ProfileHandle Height: 36 inch...
$459.88
MUL-T-LOCK MTL800 Cylinder for SCHLAGE/ARROW Single Cylinder Deadbolt (4 chamber)
MUL-T-LOCK offers a wide variety retrofit solutions for existing Knob, Lever, and Deadbolt Locks. Although MUL-T-LOCK's Hercular® Deabolts provide superior protection, some users with limited budgets would like to upgrade existing hardware with MUL-T-LOCK Patented MTL800(MT5+) Key Control. Fits:Arrow® D, E, F...
$155.00
Retainer Pin for KIK Cylinders
Retainer Pin for KIK Cylinders The Retainer Pin for KIK Cylinders is a critical locking component designed to secure internal parts within Knock-In Knock-Out (KIK) cylinder assemblies. This precision-machined pin holds the tailpiece and other key components firmly in place,...
$9.50
Retainer Pin Spring for KIK Cylinders
Retainer Pin Spring for KIK Cylinders The Retainer Pin Spring for KIK Cylinders is a critical component designed to ensure secure retention and reliable operation of retainer pins within KIK (Knock-In Knock-Out) cylinders. This spring is specifically engineered to maintain...
$0.64
Tailpiece Retainer Ring Spring for KIK Cylinders
Tailpiece Retainer Ring Spring for KIK Cylinders Secure Spring Clip for Tailpiece Retention in KIK Cylinders The Tailpiece Retainer Ring Spring for KIK Cylinders is a small but essential component designed to hold the tailpiece firmly in place within standard...
$12.50
Horizontal Tail for Rim Cylinders (2.460" Length)
Horizontal Tail for Rim Cylinders – 2.460" Length Extended Horizontal Tailpiece for Deep or Custom Lock Installs The Horizontal Tail for Rim Cylinders (2.460") is a long-format tailpiece designed for locks that require additional reach and lateral actuation. Engineered for...
$12.50
Protective Cover for Mogul Cylinder Plug
Protective Cover for Mogul Cylinder Plug Enhanced Protection for High-Security Plug Assemblies The Protective Cover for Mogul Cylinder Plug is designed to shield and secure the internal components of mogul-style cylinder plugs. Ideal for Folger Adam®-compatible systems, this cover helps...
$10.37
Cam for Mortise Cylinder Russwin® Clover Type
Cam for Mortise Cylinder – Russwin® Clover Type Russwin® Clover-Style Cam for Mortise Cylinders – Precision Fit for Specialty Locking Systems The Cam for Mortise Cylinder (Russwin® Clover Type) is specifically designed to fit mortise locks that require the distinctive...
$5.85
Summit Active Handle Kit for 1-3/4" and 2-1/4" Doors
- Brushed Chrome
Non-handed and designed to be compatible with the INTERLOCK® lever compression lock, our handles complete the ideal multi-point locking solution for aluminum and vinyl swing door applications. Handle to Cylinder PZ: 3-11/32 inch (85mm) 3.346 Screw hole spacing: 7-1/8 inch...
from $176.51
100MM EURO / PROFILE CYLINDER 50/50 WITH RECTANGULAR THUMBTURN - SATIN NICKEL
Part Number: 6-U7401-90-0-SN G-U / Ferco 50/50 Profile cylinder for 2-3/4 inch (70mm) thick doors with multipoint locksThis cylinder is for doors with the Multipoint lock centered in DoorUsed with the Key operated and other applications requiring a Euro Profile...
$79.80
G-U FERCO Multipoint Lock Faceplate FOR SECURE Connect
Part Number : 9-C4793-03-0-8B Color : Stainless Steel Faceplate 20mm wide with rounded ends (two required) Additional information : -16 or 20mm stainless steel faceplate with radius endsfor easy installation and cleaner look- Mounting screws included with Secure Connect 200 unit (K-C5560-20-4-6)-Fastening...
$59.95
G-U FERCO Multipoint Lock Faceplate FOR SECURE Connect
Part Number : 9-C4793-01-0-8B
Faceplate 16mm wide with rounded ends (two required)
Additional information : -16 or 20mm stainless steel faceplate with radius endsfor easy installation and cleaner look- Mounting screws included with Secure Connect 200 unit (K-C5560-20-4-6)-Fastening screws not included (9-C5362-32-0-8)
$53.00
G-U FERCO Multi-point Lock Concealed Cable Duct
Part Number: 6-29854-00-0-0
Color: Zinc
Additional information: Installation screws are included
$211.38
LOCK WITH CYLINDER BORE 1.96" (50MM) BS, 7-7/8" (200MM) PZ
Part Number: 6-25918-50-0-1 Mortise Lock with cylinder Bore 1.96" (50MM) bs, 7-7/8" (200mm) PZUsed with G-U / Ferco Hardware, 2-5/8" thick Aluminum Terrace DoorG-U Part Number: 6-25918-50-0-1Faceplate Width: 15/16 inch (24mm)Faceplate Height: 7-7/8 inch ( 200mm)Backset: 1.96" (50MM)Backsets: 25mm, 30mm, 35mm,...
$143.05
Dirigent Handle Set with PC Rosettes - Interior/Exterior
Part Number : K-C0776 G-U / Ferco Balcony door handle set with Rosettes for profile cylinder Note: Ferco Architectural Hardware warranty does not cover corrosion. This information is especially useful if you live in a coastal area where exterior corrosion is...
from $192.08
G-U FERCO DELIO INT/EXT HANDLE & ROSET. 44/90, TITAN
Part Number : 25759-00-0-C
Finish : TITAN
G-25759-00-0-C DELIO TT INT/EXT HDL&ROSET. 44/90, TITAN
$125.00
G-U Construction Key Tool
Part Number : B 3539 0111 Color : Red Key Tool Cylinder Length Additional information:1) The construction key is available for those who prefer toinstall the decorative hardware trim and lever sets on doorsafter the construction has been completed.2) Installing...
$24.95
G-U Fastening D1 Screws, Stainless Steel
Part Number : 9-C5362-32-0-8
Color : Stainless Steel
Additional information:-Stainless steel lock fastening screws-Type D1 with self-drilling spiral point and high duplex thread with “Quadrex” socket-Sharp tip for quick drive
$307.52
Top Brands
