DOOR PARTS & HARDWARE – Page 2 – Golden Locks Inc
Sold Out
Left Hand Astragal Boot - 362215
Part Number: 362215 Left Hand Astragal Boot
$26.95
Sale
Acme 85, 2 Wheel, 7/8 Dia. Top Hung Closet & Pocket Door Roller
ACME 85, 2 WHEEL, 7/8 DIA. TOP HUNG CLOSET & POCKET DOOR ROLLER Part No: 25012/85. Acme Twin / Tandem pocket door wheels; top mounting; adjustable bracket; round edge nylon wheel; fits 3/4 to 1-3/4 inch thick doors. These pocket...
$22.50 $14.25
3-5/8" X 4" Adjustable Hinge, All In One (V-H) Inswing Door - 370002 - Lifetime Polished Brass
Part Number: 370002 Adjustable Door Hinge; all in one Platform; Brass Base, Polished Brass PVD Finish The hinges provide for adjustment of a door both vertically and horizontally in the opening. This can help account for sagging walls and floors,and...
from $62.99
MARVIN SQUARE SPINDLE, 1/4" X 4-1/2" (7MM X 115MM) - 11860962
Part Number: 11860962 Solid spindle for Marvin Integrity hinged door handle sets (Cambridge and Northfield) 1/4" x 4-1/2" (7mm x 115m) Priced and sold as each 854-12759
$5.89
Ipd - Mortise Lock Drive Bar / 7mm Spindle For A 1-3/4 Thick Door
IPD - MORTISE LOCK DRIVE BAR / 7MM SPINDLE FOR A 1-3/4 THICK DOOR. Part No: 14426. Brand: PEACHTREE. Replacement Spindle for Peachtree IPD series multi-point lock doors. Size: 1/4 (7mm) square, 3/4 length. Sold in pairs.
$7.15
GIESSE PRIMA PLUS BALCONY HANDLES, INTERIOR / EXTERIOR, NON LOCKING - Silver
Giesse Prima Plus Balcony Handles, Interior / Exterior, Non LockingThis is the Interior and Exterior lever with spindle, no screws. Part Number: BT43010 Door Thickness: 3 to 3-1/4 inch (78mm-82mm) Screw Hole Spacing: 1-11/16 inch (43mm) 1.693 Screw Length: Not Included...
$41.84
Marvin After Market Elegance 10" Arch Keyed Active Hardware - 395004.
Marvin After Market Trim for Multipoint lock handles Part Number: 395004 This handle set is used by Ashland, Milgard, Jeldwen, Caradco, Cantera, Delta, Pozzi, PGT and others Plate Height: 10 Inch Plate Width: 1-3/4 Inch Plate Style: Arch Top Screw Hole Center:...
$322.90 $265.00
PRIVACY LEVER LATCH, 2" BACKSET, 5/16" HUB - 48145203 - Brass
$56.00
PRIVACY LEVER LATCH, 2" BACKSET, 5/16" HUB - 48145203 - Brass
Part Number: 48145203 Privacy Lever Latch, 2 inch backset, 5/16" Spindle Hub  Application: Lever on privacy handle set (bed or bath ) Backset: 2 inch (50mm) Hub Diameter: 5/16 inch (8mm)  square & 9/32 inch (7.3mm) Diamond  Strike Plate: T-Type  48145203-SN (Satin...
$56.00
2" Backset Latch, Deadbolt - 48141231 - Oil Rubbed Bronze
$55.00
  • + 1
2" Backset Latch, Deadbolt - 48141231 - Oil Rubbed Bronze
Part Number: 48141231 Backset: 2 inch (50mm) Overall Length: 3-1/16 inch Screw Holes: 1 inch Center - Center ( fits Rim Cylinder )  Faceplate: 1" x 2-1/4"
$55.00
  • + 1
Sale
Mortise Lock, Multi-Point With Concealed Rods, Active 60/92 - Marvin
MORTISE LOCK, MULTI-POINT WITH CONCEALED RODS, ACTIVE 60/92 - MARVIN. Part No: 4991637. Marvin Ultimate Inswing doors manufactured 1/17/2000 to present. Active Multi-Point lock body, used with Concealed Rods that screw into top and bottom. DOES NOT include rods, lock...
$145.65 $119.75
American Cylinder Lock, Schlage Sc1, 5 Pin Tumbler - Keyed Alike
Part Number: 15032 American keyed cylinder, 5 pin tumbler sliding door cylinder lock with hardened tailpiece The most common keyed cylinder used with Deadbolts, single and multipoint locks, Andersen, Peachtree, Pease and others Keyway; Schlage SC-1 Rekeyable 5 pin Keying: Keyed...
$14.96
Sale
Outside Lock Cylinder, Classic Vinyl Sliding Door Sc-1, 5 Pin
Part Number: 14346 Outside keyed lock cylinder for Milgard classic vinyl sliding doors. American Cylinder: 5 pin Schlage SC-1 cylinder with 2-1/2 inch tailpiece, 2 keys. This fits the exterior handle pull 14345 with hole. Priced and sold each, 2 keys Key Cylinder...
$19.50 $14.99
Sold Out
Marvin Multi-Lock Hardware French / Ultimate Sliding French Door
Part Number: 10145001 This is a Multi-point lock hardware assembly unit for French Doors and Ultimate Sliding French Doors made by Marvin. It is designed to be used on the Active / Operative panel. This lock features 3 locking points, including...
$374.74
Sale
Kennatrack 400, 15/16 Pocket Door Wheel
KENNATRACK 400, 15/16 POCKET DOOR WHEEL - 25044. Part No: 25044. Kennaframe Pocket door 15/16 Dia. wheel only - White Original had Markings: 400 Kennatrack Item was used during the 1950's-60's on pocket and sliding closet doors. Pocket door wheel...
$4.75 $4.55
Shim / Spacer, Hinge 1-1/4 X 3-5/8 X 1/32 - Black - 8787635
Part Number: 8787635 Hinge shim / spacer for standard 3-5/8 hinge. 1/32 inch thin.
$1.50
G-U CREMONA EUROPA ACTIVE MULTIPOINT LOCK WITH SHOOTBOLTS
Model: 4990332-KIT Active 3-point lock with shootbolt on top and bottom for doors measuring 6 feet 8 inches.Available Backsets ( drop-down menu): 30mm, 35mm, 40mm, 45mm, 50mm, 55mmThis lock is croppable and can be installed in doors over 81 inches with...
$550.00 from $343.75
LATCH PASSAGE 2-3/8 SPRING LATCH - 4806530-KIT
Part Number: 4806530-KIT Replacement spring latch, non-handed for closet/ hall passage door, no faceplate. No holes in latch for screws. Installation screw holes from lock are vertical (up and down). Replaces: Old Style Dexter, Emtek, Cifial, Gainsborough and others with same...
$19.95
MARVIN INTEGRITY SERIES ACTIVE MULTI-POINT LOCKING SYSTEM, AMERICAN 45/92
MARVIN INTEGRITY SERIES ACTIVE MULTI-POINT LOCKING SYSTEM, AMERICAN 45/92. Amesbury P1000 / Marvin Integrity Series. Stainless steel handle-activated multi-point locking system with top and bottom shootbolts. Function: Active, Normally used with Keyed Cylinder Hardware. Locking Points: 3; 1 Deadbolt; 2...
$295.00
MOUNTING BRACKET - STORM DOOR CLOSER REINFORCING
MOUNTING BRACKET - STORM DOOR CLOSER REINFORCING. Part No: 308050. Cadmium plated steel bracket and plate Plate bolts to bracket Used when installing storm door closure to damaged door jamb. Note: Wind Chains with spring help reduce damage to storm...
$6.33
Replacement Cylinder Tail Piece With Break Off Tabs
Part Number: 14287 Replacement part for American style keyed cylinder with flat tail piece. This item has 14 break away score marks at 1/8 inch increments for thinner doors up to 2-1/4 inches thick. Door Thickness: Varies, up to 2-1/4 inch...
$1.08
2-Point Double Hook Sliding Door Lock, 11-3/4 Face With Pin
Part Number: 15187 Gemini Internal latch two point double hook sliding door mortise lock for wood or vinyl doors. This model has anti slam pin and replaces older models without pin. Used by Sash Control, Marvin, Weather Shield and others Backset:...
$67.95 from $53.95
Closet Door Part, Pivot Rod, Mirror Door - 26154
Part Number: 26154 Bi-fold Mirror Closet door Pivot, Used with Plastic Block  Markings: cox 26-055 Door Type: Mirror Bifold door, metal frame Material: Plastic case, metal pivot rod Pricing: Sold Each Other part number 2-130 bottom adjusting Pivot - white 
$4.95
Threshold, Adjustable Cap, 36 X 4-9/16" Wall - Dark Bronze - 341004-36-Dbrz
Part Number: 341004-36-DBRZ Therma-Tru Adjustable threshold for doors with 4-9/16 inch wall thickness Overall Width: 5-7/8" Overall Length: 36-1/8" Minimum Height: 1-1/2" ( height with cap screwed down ) Maximum Height: 1-3/4" Sill Color / Finish: Dark Bronze Adjustable Cap Color:...
$89.95
Ferco Three Way Adjustable Hinges, (Box Of 3 Hinges) - 6-C8072-Az
Three way adjustment hinge that can be used to increase or decrease weather seal pressure on door panel.   1. Horizontal, Sideways Adjustment - Width   ±2mm  2. Vertical, Up and down Adjustment - Height  -2mm, +5mm  3. Compression Adjustment - In and Out   ±2mm  Part...
$125.00
Adjustable Hinge, Millennium 2d, 4 X 4 Set, Inswing, Steel Base - 369911 - Antique Brass
from $19.95
  • + 1
Adjustable Hinge, Millennium 2d, 4 X 4 Set, Inswing, Steel Base - 369911 - Antique Brass
Part Number: 369911 Columbus 4 x 4 Millennium 2D Adjustable Door Hinge for vertical and horizontal adjustments on hinged doors. There are 2 types of adjustable hinges for each door panel 1. Set Hinge: 1 per panel, Vertical Adjustment2. Guide Hinge:...
from $19.95
  • + 1
V200 Left Hand All In One Adjustable Hinge, Latest Design - 363717 - Antique Brass
from $69.95
  • + 3
V200 Left Hand All In One Adjustable Hinge, Latest Design - 363717 - Antique Brass
Part Number: 363717 V200 Left Hand All In One Adjustable Hinge - PVD No Tarnish Finish Used by Marvin, Caradco (Jeld-Wen) and others Screws not included - easiest way to replace screws it take originals to a hardware store and match...
from $69.95
  • + 3
Hoppe F8709, 2009 Guide Hinge - Rustic Umber - 3052105
* Adjusts both vertically (Set Hinge) and horizontally (Guide Hinge) by +/- 1/8\" (+/- 3mm) for a perfect swing without costly repairs or carpentry work* Large 3/16\" hex head screws make adjustments effortless, and prevent the stripping that can occur...
$32.63
3-5/8 X 4 Adjustable Hinge, All In One (V-H) Inswing Door - 370001 - BLACK
Part Number: 370001 The Outswing hinge has a non-removable pin and can not be taken apart. Adjustable Door Hinge; all in one Platform; Non-Handed, Steel Base, Satin Nickel PVD Finish Size: 4 x 3-5/8 inch reversible The hinges provide for adjustment...
from $56.75
Sold Out
KWIKSET 300DL-5V1 DELTA PRIVACY DOOR LOCK WITH NEW CHASSIS AND 6AL LATCH AND RCS STRIKE
Part Number: 300DL-5V1 Series: Kwikset Delta Backset:6 Way Adjustable Plain Latch, 2-3/8" or 2-3/4" Backset Strike: Round Corner Full Lip Strike Crossbore Size: 2-1/8" Crossbore Color: Antique Brass Material: Zinc Function: Privacy Design: Delta Handing: Reversible; works on right- or left-handed...
$24.41
PRIVACY LEVER LATCH, 2-3/8" BACKSET, 5/16" HUB - 48145332
Part Number: 48145332 Handed: No, reversible for LH and RH  Faceplate: Square Corner Strike Plate: Square Corner, T-Strike  Backset: 2-3/8 inch (60mm) Spindle Hub Diameter: 5/16 inch (8mm) Overall length: 3-3/16 inches (81mm) from faceplate Tongue color: Nickel  Faceplate Colors: Polished...
from $54.90
[time] , [location]
You have successfully subscribed!
This email has been registered
Liquid error (layout/theme line 273): Could not find asset snippets/product-customizer-asw.liquid