DOOR PARTS & HARDWARE
Sale
Marvin Offset Mushroom Bolt, Sliding Door Lock Strike - Stainless Steel
Part Number: 395048 Marvin Offset Mushroom Bolt Sliding French and Ultimate French doors Screws into a mounting plate on back side of door jamb Length: 1-11/16 inches Base Width: 7/16 inch Thread: 1/4-20 Material: Stainless Steel Markings: US Pat 5120094 Used...
$47.00
$35.95
Sale
Winkhaus 2 Hook Multi-Point Lock For Sliding Patio Door - 28 Mm
Part Number: 15122 Faceplate Width: .787 (20 mm) 3/4 inch Faceplate Length: 14.57 (370mm) 14-1/2 Inch Lock Backset : 1.102 (28mm) 1-7/64 inch Lock Center: 3.62 (92mm) 3-5/8 Inch Lock Spindle Hub: .3149 ( 8 mm) 5/16 inch square Faceplate Material:...
$250.00
$199.00
Arcadia 3 Inch Latch - Sliding Patio Door - Diecast/Steel
Part Number: 15092
Internal lock for sliding patio door with diecast housing and steel hook/ latch lever.
This lock requires a mortise installation.
There is a plastic retainer clip.
Black plastic latch lever.
$9.85
Medium Duty Concealed Overhead Commercial Door Closer, 90° With Hold Open - 381075
Part Number: 381075 This overhead commercial door closer replaces the original “Kawneer Husky” concealed overhead closer. The new version features a two-speed closing control to prevent the door from slamming on single-acting applications. It also prevents over-swing on double-acting applications. This...
$450.00
Store Front Commercial Doors Pivot Hinge Ykk - 380015
- Aluminum
Part Number: 380015 Store Front Commercial Door Pivot Hinge YKK For aluminum frame store front doors and doors up to 125 lbs. Weather resistant Die-cast aluminum case construction Vertical adjustment 1/8" Fully retractable, spring loaded top pin for easyinstallations Full race...
$27.95
Faceplate, Deadbolt Radius W/ Weatherstrip Commercial Doors Parts - 380034
- Aluminum
Part Number: 380034
Length: 6-7/8\''
Width: 1\''
Top Screw Hole Spacing: 2\''
Bottom Screw Hole Spacing: 3-5/8\''
$4.95
Keller Corner / Guide, Shower Door
KELLER CORNER / GUIDE, SHOWER DOOR.
Part No: 18262.
Keller shower door # 3072 Inside Panel Bottom Guide.
Sold Each
other Part Number TEH20
keller Tridoor Center Guide
$9.95
5/8" Vinyl Seal With T-Slot 3/16", Black, For Shower Door
5/8" VINYL SEAL WITH T-SLOT 3/16", BLACK, FOR SHOWER DOOR. Part No: 845012. Shower Door Seal has t-slot installation and is 5/8 inches wide. Material: Vinyl Color: Black Length: Sold by the foot Width: 5/8 Inch Installation: T-Slot Priced and...
$2.50
Co-Extruded Bottom Sweep With Drip Rail For 3/8 Inch Glass
CO-EXTRUDED BOTTOM SWEEP WITH DRIP RAIL FOR 3/8 INCH GLASS. Part No: 18903. Our Most Popular Bottom Sweep for 3/8 inch Thick Heavy Glass Shower Doors.Clear Co-Extruded Bottom seal with Drip Rail for 3/8 inch thick glass.Will replaces similar piece...
from $6.95
Guide,Top Mirror Door 3-3/4 Long - Cox - 25120
Part Number: 25120
Cox mirror door guide assembly.
Series 21 mirror door systems by-pass sliding doors.
3-3/4 inches long with Plastic 7/8 x 1-1/2 inch guide.
Used with 25140 bottom roller.
21-708
Length: 3-3/4-inch
Material: Steel
Mount: Top
$6.75
Overhead Garage Door Side Lock
Heavy Duty Spring Loaded Side Lock with Latch Bolt Release Lever for Garage Door - 22218. Part No: 22206. Width: 15/16 Inch Length: 3-1/16 Inch Height: 3-5/16 Inch Latch Length: 3-3/8 Inch Latch Width: 15/16 Inch Material: Steel Color: Mill Mount:...
$14.95
Multi-Fold Shutter Hanger, Short Bolt - 27059
Part Number: 27059
Folding shutter doors hanger
4 nylon wheels
Top hung designed for light weight doors or counter top style window shutter
Color: Mill
Diameter: 17/32-inch
Material: Nylon
Mount: Top
Type: Convex
$55.00
Slimfold Clamp, Pivot Rod, Metal Bi-Fold Door - Old Style - 26508
Part Number: 26508
Slimfold Clamp, Pivot rod, Metal Bi-fold door - Old Style
Pivot rod clamp used to adjust height
Nylon housing
Used by Slimfold and others.
Priced Each
Diameter: 5/16-inch
Material: Nylon
$3.25
Sold Out
Marvin Inactive 6-3/8" Flushbolt, Polished Brass - 11101765
Part Number: 11101765
Marvin Inactive 6-3/8" Flushbolt, Polished Brass
$44.46
FLIP LEVER EXTENSION MORTISE FLUSH BOLT FOR ALUMINUM T-ASTRAGAL - 362022
- Polished Brass
Part Number: 362022 Housing Width: 3/4 inch Housing Length: 6-3/8 inch Housing Overall length 6-11/16 inch Housing Face Width 11/16 inch HousingWing Width 15/16 inch HousingThickness 9/16 inch Screw Hole Center 5-1/2 inch Bolt Shape: Round Threaded Rod Length: 14-1/2...
$24.95
Sold Out
Sill Cap, Therma-Tru Composite 36" Door Threshold - 341010-36
- Dark Oak
Part Number: 341010-36 Overall Length: 37-1/2 inchNote: Typical Threshold width: 36-1/8 inch Cut to length as needed to fit your door width Thickness / Height: 9/16 inch Material: Composite Color / Finish: Available in light oak or dark oak Weather-strip...
$52.95
$9.95
36 Inch By 1-1/4 Inch Vinyl Threshold Replacement Insert For Adjustable Thresholds - Gray - 83504
Part Number: 83504 Grey vinyl insert for metal thresholds Provides seal against door bottom to keep air from getting through 36 inches Long 1-1/4 inches wide where meets threshold Height is 3/8 inch Used on adjustable thresholds Requires 3/8 to 1/2...
$9.95
from $28.30
Truth Sentry Hinged Door Adjustable Guide Hinge, Lho / Rhi, 4 X 4 Inches - 9748012
- Antique Brass
Part Number: 9748012 857-10364 857-10365 Truth Sentry Horizontal adjustable door hinges are made to provide maximum strength and security. Sentry Hinges are made to adjust to create the perfect fit for your door. They are made out of extruded brass and...
from $28.30
MUL-T-LOCK MTL800 Rim Cylinder
Part No : 800-RIM1VT
Size: 1-1/8"
Tail: Vertical (horizontal tail available upon request)
Ring: Flat
Key Way: 616B
Keys Included: 2 (or 1 if keyed alike)
Fits:Any surface mount rim lock ("Segal" type, slam or jimmyproof)
from $190.00
45.5/31.5 Euro profile full cylinder with 90° turn and Dallas D-knob
Part number : 414531810 Hoppe PZ00090KD Euro profile full keyed cylinder with 90° turn and D-knobUsed on the HLS 9000 Dallas handle set trimNote: The D-knob is permanently pinned to the cylinder, so they are not available separatelyCylinder Housing Length:...
from $191.99
Sale
Truth 13.15 Awning Window Hinge and Track, Pairs 18" - E-Gard® Steel
SKU: 13.15-KIT-EG Amesbury Truth 13.15 Concealed awning window hinge, 18 inch track, pairApplication: Concealed Awning HingeTrack Length: 18 inchesSash heights: 19 - 26 inchesSash weight: up to 38 lbs.Hinge Arm Material: Steel, E-GardA(R) corrosion resistant finishHinge arm Length: long 10 inch...
$65.73
$41.55
Truth 13.14 Awning Window Hinge and Track, Pairs 14" - E-Gard® Steel
SKU: 13.14-KIT-EG Amesbury Truth 13.14 series 2-Bar concealed awning window hinge assembly. Stainless Steel Track and E-Gard steel corrosion resistant hinge armsTruth Part: 13.14Track Dimension: 14 inch LengthSash Weight: 20 pounds MaximumSash Height: 14-19 inchesPriced and sold in pairs.Includes 1 left...
$27.84
ENDURA Z-Series Inswing Extenders for 4-9/16" Sills
- Mill
Looking for a sill width to match your opening, but can’t find your width? Are you looking to extend your Endura Z-Series sill deck just a little bit further? Look no further–Z-Series Inswing Sill Extenders are here! Simply add the extender to the...
from $16.17
Sale
$450.00
from $298.15
LCN 1460T Surface-Mounted Heavy Duty Door Closer with Powder Coat Finish
- 689 - Aluminum
1460 Series Closer The 1460 Series is a universal medium-duty closer designed for maximum versatility in commercial and institutional applications, meeting ANSI/BHMA A156.4 Grade 1 and ADA reduced-opening-force requirements. It installs quickly and accurately and offers a variety of options....
$450.00
from $298.15
from $41.20
Endura Z-Adjustable Cap Sill™ Full Narrow Composite Threshold, Choose Width, Finish & Door Length
Part Numbers : ZAI36, ZAI45, ZAI56, ZAI68, ZAI76, ZAI86 The Endura Z-Series Z3685FN Door Sill features a durable Full Narrow (FN) composite substrate with aluminum cap system engineered to provide reliable weather sealing and long-lasting performance for exterior inswing doors....
from $41.20
Endura Z-Articulating Cap Sill™ and Sealing System, Choose Width, Finish & Door Length
Part Numbers : ZACL36, ZACL45, ZACL56, ZACL68, ZACL76, ZACL86 The revolutionary Endura Z-Articulating Cap Sill™ and Sealing System features a comprehensive door sill that combines ingenuity and durability to seal your entryway door. The system offers a sill cap that...
from $40.51
Endura Z-Adjustable Cap Sill™ and Sealing System, Choose Width, Finish & Door Length
Part Numbers : ZAIL36, ZAIL45, ZAIL56, ZAIL68, ZAIL76, ZAIL86 Z-Series Composite Door Sills are simply the best sills on the market. The Z-Series uses a patented design of all synthetic components that eliminates the worries of wood substrate sills. The...
from $24.36
Sale
$1,829.00
from $1,499.88
LCN 4310ME SENTRONIC, Surface-Mounted Heavy Duty Fire/Life Safety Track Closer - Plated Finish
- Bright Brass
The 4310ME Sentronic is a Heavy Duty, electrically controlled Closer/holder designed to provide infinitely adjustable hold-open for fire and smoke barrier doors. Door is held open until current interruption releases mechanism and the Door closes. Single Lever (track) Arm Closer...
$1,829.00
from $1,499.88
Interlock LCL Mortise Lock 35/92 with Extended Faceplate
Part Number: DL01-0542 DL01-6630 -INDURO 4P ACTIVE 30 BS LONG THROW 24mm Interlock LCL 4-Point Lever Compression Lock 35/92 Used as Single point lock or 4 point lock with concealed rods Specifications (Extended Faceplate version): Available Backset: 35mm / 1-3/8 (1.378)...
$182.39
Top Brands
