Commercial Doors Hardware
Flush Bolt 12 Inch, 1/4bs Commercial Doors Hardware - 380212
- Aluminum
Part Number: 380212 Rod 12 inches with 1/4 inch offset Spring loaded lever action Rod extension- 7/8 inch throw Backset 3/4 inch - three models available specify rod length and offset, 1/8 inch and 1/4 inch 5/8 inch adjustment on rod...
from $10.14
Flush Bolt 8 - 10 Inch 1/8bs Adjustable Extension Bolt- 380210
- Aluminum
Part Number: 380210 Rod 10 inches with 1/8 inch offset - standard Spring loaded lever action Rod extension- 7/8 inch throw Backset 3/4 inch - three models available specify rod length and offset, 1/8 inch and 1/4 inch 5/8 inch adjustment...
$12.95
Flush Bolt 15 Inch,1/8bs Commercial Doors Hardware- 380215
- Aluminum
Part Number: 380215 Rod 15 inches with 1/8 inch offset - Standard Spring loaded lever action Rod extension- 7/8 inch throw Backset 3/4 inch - three models available specify rod length and offset, 1/8 inch and 1/4 inch 5/8 inch adjustment...
$10.95
Global Commercial Grade Dummy Handle 26d Satin Brushed Chrome Sl7160y26d - 380556
Part Number: 380556
Global commercial grade Dummy handle 26D satin brushed chrome SL7160Y26D
Similar to Schlage AL40S Standard grade 2 commercial Lock at half the price.
$49.95
Strike Plate, Asa Commercial - Stainless Steel - 380601
Part Number: 380601 Commercial Door Strike Plate. Includes one strike with #12-24 x 1 inch combination screws. Used on wood and metal jambs with most grade 1 locksets. Description: Standard ASA commercial door strike Material: Stainless Steel Color: Stainless Steel Sold:...
$7.65
Thru-Bolt With Grommet Nut Set, 1-5/8 Inch Door Closer - 381033
- Aluminum
Part Number: 381033
Thru-bolts and grommet nuts (sex bolts) for door closer installation.
Door Thickness: 1-5/8 Inch
Colors: Aluminum
Priced and sold as a 3-pack
$4.00
Top Jamb Extender For Commercial Door Closer - 381034
- Aluminum
Part Number: 381034
This Top Jamb Extender is used when an extended reach is required for top jamb mounting.Measurements:
Total Length: 13-1/2\''
Thread Length: 3-3/4\''
Thread: 10mm 1.25 thread pitch
$10.95
Heavy Duty Concealed Overhead Commercial Door Closer, 105 No Hold Open - 381077
Part Number: 381077 This overhead commercial door closer replaces the original “Kawneer Husky” concealed overhead closer. The new version features a two-speed closing control to prevent the door from slamming on single-acting applications. It also prevents over-swing on double-acting applications. This...
$325.00
Friction Type Hold Open Arm For Commercial Door Closer - 381032
- Aluminum
Part Number: 381032
Hold-open door closer arm for regular, top jamb or parallel arm mounting.Measurements:
Arm Length: 12''
Forearm Length: Minimum: 10-1/4'' Maximum: 15-1/4''
Thread: 10mm (3/8'') 1.25 thread pitch
Shaft Mounting Hole: 12mm Square
from $27.95
Drop Plate, Mounting Plate For Door Closer - 381027
- Aluminum
Part Number: 381027Door Closer Measurements:
Screw Holes Threaded @ 3/4 Tall, 9-1/16 Wide
Plate Width: 9-13/16 inch
Plate Height: 3-9/16 inch
Plate Thickness: 3/16''
Sold as a kit: 1 Plate, 4 threaded screws & 4 Wood Screws
$12.35
Ada Compliant Grade 1 Commercial Door Closer, Adjustable Spring Size 1-4 - Aluminum - 381040
Part Number: 381040 This is a grade one triple valve slimline commercial door closer with a narrow cover. This model is ideal for businesses, new constructions and renovations. It has a complete selection of accessories to accommodate the requirements of any...
$91.95
Parallel Arm Mounting Bracket For Heavy Duty Door Closer, Aluminum - 381065-Al
Part Number: 381065-AL Length: 4 inches Width at Header Mount: 4 inches Shoe Mount Holes: 1-15/16 inch Construction: Steel Color: Aluminum This is a Parallel Arm Bracket / Mounting Plate. It is used in the parallel arm mounting process. This bracket...
$7.00
Store Front Commercial Doors Pivot Hinge Kawneer Top Hardware - 380013
- Aluminum
Part Number: 380013 Replacement Pivot Set for Kawneer commercial store front doors TH1118-T Offset Pivots are used for both flush face frame installation and 1/8 inch recessed door applications. Suitable for aluminum doors weighing up to 125 pounds. These pivots are...
$21.45
Arch Middle Pivot Hinge - Aluminum - 380000
- Aluminum
Part Number: 380000
Arch Middle Pivot Hinge
Reversible - Plastic cap comes off to change handing
Colors: Aluminum or Bronze
from $24.19
from $22.48
Store Front Commercial Doors Pivot Hinge Us Alum - Aluminum - Left Hand - 380007
- Aluminum
Part Number: 380007 Replacement Pivot Set for US Alum commercial store front doors; TH1114U Offset Pivots are used for both flush face frame installation and 1/8 inch recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing...
from $22.48
Store Front Commercial Doors Pivot Hinge Aldora - 380010
- Aluminum
Part Number: 380010 Replacement Pivot Set for Aldora commercial store front doors; TH1116 Offset Pivots are used for both flush face frame installation and 1/8 inch recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up...
from $34.31
Adjustable Spring-Loaded Cylinder Trim Ring - 380184
- Antique Brass
Part Number: 380184 Adjustable Spring Loaded Cylinder Ring in Aluminum. This spring type cylinder collar is adjustable. Spring inside Adapter Ring compensates and prevents rattle. Cylinder face is recessed when installed and the ring is free-spinning, so the cylinder cannot be...
$6.25
Deadlatch Lock 1-1/8 Kit With Faceplate And Strike Plates - Aluminum Finish - 380121-Al
Part Number: 380121-AL
Kit includes:
Deadlatch, 1-1/8" backset with spring loaded latch
Faceplate, Non-Handed with weatherstrip on one edge
Double Hole Strike plate
Installation Back plate with screws
Dustcap, Black
$34.94
Commercial Doors Push / Pull Exit Paddle, Lh - 380023
- Aluminum
Part Number: 380023 Commercial Doors Push / Pull Lever Handle / Exit Paddle - 2 colors This exit paddle is used with Deadlatch version ( Spring Latch ) Mortise lock. Handing can be easily changed by removing C-clip and flipping cam...
from $35.46
Commercial Door Latch Shield 3-5/16" X 12" - Grey - 380088
Part Number: 380088
Commercial Door Latch Shield
3-5/16" x 12"
Grey
Includes mounting bolts
Non-handed
Fits narrow stile aluminum doors
Tamper-proof
$12.95
Adams-Rite 1" Dummy Mortise Cylinder, Zinc Construction - 380100
- Aluminum
Part Number: 380100 Single, NO KEY mortise cylinder; Commercial Store Front Glass Doors Normally used on interior side of door when key is not needed or wanted pressure cast zamac construction;Specifications Key: None - Dummy Cylinder Size: 1 inch length, standard...
$5.95
Deadlatch Faceplate With Weatherstrip, Radius - 380046
- Aluminum
Part Number: 380046
Replacement Face plate designed for Commercial Deadbolt lock
Configuration: Fits flat stile
Width: 1 inch
Length: 6-7/8 inch
Cut-out for Bolt: 5/8 x 2-7/8 inch
Finish: Aluminum or Bronze
Includes: Faceplate and Screws
$9.00
Commercial Deadbolt, Replacement Deadlock, No Faceplate - 380074
Part Number: 380074 Deadbolt Mortise Lock Commercial Rectangular Deadbolt Handed: NO, Non-Handed Case dimensions: 7/8 Width x 5-1/2 Long overall x 1-5/8 Deep Latchbolt: 5/8 Width x 1-1/4 Length x 5/8 Throw Screw Holes: 5-1/8 center to center Backset: 31/32 inch...
$59.00
Commercial Deadbolt Lock Flat Faceplate - 380030
- Aluminum
Part Number: 380030
Replacement Face plate designed for Commercial Deadbolt lock
Configuration: Fits flat stile
Width: 1 inch
Length: 6-7/8 inch
Cut-out for Bolt: 5/8 x 2-7/8 inch
Finish: Aluminum or Bronze
Includes: Faceplate and Screws
$4.95
Amarlite Replacement Mortise Lock For Narrow Style Doors. - 380070
Part Number: 380070 56-886 Amarlite / GUARD Amarlock Replacement Lock for Narrow Style Doors. Unique, tele-scoping bolt-in-a-bolt, for a total throw of 1-1/4. Uses a 1-3/16 diameter cylinder. ( not Included ) Backset: 7/8 Case Size: 1-1/8 x 1-1/2 x 2-15/16 Bolt: ...
$70.00
Commercial Door Latch Shield 2-5/8 X 12 Adams-Rite Dead Latch - Grey - 380081
Part Number: 380081 Latch Shield for Commercial door with Deadlatch type lock use on aluminum entrance / storefront doors fits Adams Rite Dead latch / Dead lock hardware Backset: 1-1/8 inch ( most common ) Hole Diameter: 1-7/16 inch Size: 2-5/8...
$22.58
Thumb Turn, Brass Mortise Cylinder,Brass Adams-Rite Cam - 380105
- Aluminum
Part Number: 380105 Mortise Thumbturn Cylinder, 1 inch, Brass, Thumb Turn with Adams-Rite Tail Piece. One inch length from back of cam to housing. Heavy duty Brass Inter-changes with standard 1-5/32 inch keyed mortise cylinder Cam: Adams RIte - Commercial door...
$14.95
Rim Cylinder, 5 Pin Diecast, Schlage Sc1 Key Lock
RIM CYLINDER, 5 PIN DIECAST, SCHLAGE SC1 KEY LOCK.
Part No: 380313.
Keyway: Schlage SC1
Pins: 5 Pin Rekeyable
Material: Zinc Diecast
One key cylinder with trim ring, Two keys , One mounting plate and two screws
Priced and sold each.
$9.95
from $1,101.80
Schlage L9453P 06L Entrance Mortise Lock with Deadbolt, 06 Lever, L Escutcheon
- Bright Brass
Schlage L9453P Entrance Mortise Lock with Deadbolt, 06 Lever, L Escutcheon, Conventional Cylinder Nothing is tougher. The L Series is built to withstand the rigors of daily use without fail and is among the most durable, dependable, and intelligent family of products...
from $1,101.80
Kickplate with Bevel - 8" x 28"
Finish/Texture
Shown in Silicon Bronze Rust (BR)
Available in several other heights and widths
Kickplates are also available without a beveled edge
$748.00
Top Brands
