BALL CATCHES, ROLLER, MAGNETIC
SET OF 3 STRIKE PLATES
Set of 3 Strike Plates Part Number: 37400109 This set of Strike Plates was used on old Peachtree Citadel IPD French Hinged Doors, Pella Entry Doors, Trilennium Locks and Others The Strike set has curved lips and will fit 1-3/4 inch...
from $12.38
Magnetic Catch 3-1/8"X 1"X 9/16" Two Magnets - 360302
Part No: 360302
Magnetic Catch
Length: 3-1/8 inch
Width: 1 inch
Height: 9/16 inch
Two (2) Magnets
Finish: Brushed Chrome
$7.59
Sale
Round Corner, Steel Ball Catch 2-1/8 In. X 1 In - 360130
- Antique Brass
Part No: 360130 Radius Corner Ball / Bullet Catch 7/8 x 1-1/8When using dummy hardware on Hinged closet doors these will hold doors closed installed on top of door Packed: Packed In Individual Poly Bags Strike Sold with Catch Overall Size:...
$17.23
from $15.18
SET OF 3 LARGE STRIKE PLATES, 1-3/4" DOORS
The Strike set has curved lips and will fit 1-3/4 inch thick doors.
Height: 4 InchWidth: 2-5/16 InchScrew Center: 3 InchLatch Opening Width: 1-7/16"Latch Opening Length:1-7/8"
Available Colors:Satin NickelBlack
Contents: 3 Strike Plates and Installation Screws
$41.95
Drive In Bullet / Ball Catch With 7/8" Base, 1-1/8" Height - 360101
Part No: 360161
Overall Size: 1" x 1-1/8" - see additional line drawings
Finish: Polished Brass plated steel
$7.59
Sale
Ball Tension Catch 1-7/8" - 360201
- Antique Brass
Part No: 360201
Ball Tension Catch 1-7/8 inchMounting Base Max Length: 1-7/8 inchMounting Base Width: 5/16 inchTotal Height: 5/8 inchAdjustable TensionMaterial: Solid BrassColors / Finishes Available:Polished BrassAntique BrassOil Rubbed BronzeBrushed/Satin NickelAntique Nickel (Pewter)Flat BlackBrushed/Satin ChromePolished ChromeLifetime Polished Brass (PVD)Â
$17.23
from $6.90
Mini Ball/Bullet Catch, 5/16" Diameter, 1/2" Length, 3/16" Projection
Mini Bullet Catch normally used on interior closet or cabinet doors. Part No:Â 360745 Diameter: 5/16 inch Length: 1/2 inch Bullet catch protrudes: 3/16 inch. Overall Length with Tip: 5/8 inch Bullet catch is easily installed by drilling a 3/8 inch...
$1.25
Bullet Catch - Mini 3/8 Diameter - 1/2 Length - 3/16 Projection
Part No:Â 360742 Diameter: 3/8 inch Length: 1/2 inch Bullet catch protrudes: 3/16 inch. Overall Length with Tip: 5/8 inch Sold : Each - Bullet Catch with surface mount strike and nail Material: Brass plated Steel Easy Install - ready to...
$1.00
TRILENNIUM 3 STRIKES & SCREWS, 2-1/4" DOOR KIT
Trilennium 3 Strikes & Screws, 2-1/4" Door Kit
Part Number:Â 499130055
Strike plates only3 plates and screwsFits doors 2-1/4" thickColor Options:BronzeNickelPolished BrassStainless SteelBlack
from $33.60
Drive In Ball Catch, Steel
Deltana ball catches are designed for light duty doors where no latch is present. They are adjustable. Compatible strike for drive in is available. Finish: U/M: each Box Qty: 40 pc Case Qty: 200 pc Case Weight: 21 lbs Packed:...
$8.70
Ball Catch, Round Corners
- Polished Brass
Deltana ball catches are designed for light duty doors where no latch is present. They are adjustable and available in an array of fine finishes. U/M: each Box Qty: 20 pc Case Qty: 200 pc Case Weight: 35 lbs Packed:...
from $18.40
Ball Catch
- Polished Brass
Deltana ball catches are designed for light duty doors where no latch is present. They are adjustable and available in an array of fine finishes. U/M: each Box Qty: 20 pc Case Qty: 200 pc Case Weight: 35 lbs Packed:...
from $18.40
2-1/4 Full Lip Roller Catch For Closet Doors - 360442
- Antique Brass
Part No: 360442
Does NOT come with roller.
Strike plate ONLY.
Limited to existing inventory.
No returns, refunds or exchanges
Priced and sold each.
from $6.33
Bullet Catch, Large Ball Catch W/ Strike - 360161
Part No: 360161 Heavy duty brass plated bullet catch for use on interior closet doors and other utility doors. These are adjustable by turning the ring that retains the ball bearing. Material: Brass plated steel Large ball catch face plate...
$15.18
Square-Cornered Strike Plate For Drive-In Ball Catch - 360104
Part No: 360104
Screw hole spacing: 1-9/16 inches
1-3/8 inches x 2-1/8 inches
Available in Polished Brass.
Priced and sold each.
Limited to existing inventory.
No returns, refunds, or exchanges.
$2.26
Round Cornered Strike Plate For Drive-In Ball Catch - 360103
Part No: 360103
Screw hole spacing: 1-9/16 inches
1-3/8 inches x 2-1/8 inches
Available in Polished Brass.
Priced and sold each.
Limited to existing inventory.
No returns, refunds, or exchanges.
$2.26
Sale
Square Corner, Steel Ball Catch 2-1/8" X 1" - 360160
- Antique Brass
Part No: 360160 Square Corner Ball / Bullet Catch 7/8 x 1-1/8 When using dummy hardware on Hinged closet doors these will hold doors closed installed on top of door Finish: Available in 9 finishes Packed: Packed In Individual Poly Bag....
$17.23
from $15.18
Sale
2-1/4" Roller Catch, Solid Brass - 360440
- Antique Brass
Part No: 360440
Roller Catch
Size: 2-1/4 inch by 7/8 inch
Packed with Strike Plate and Matching Screws
$17.23
from $12.78
2-3/4" T-Strike For Roller Catch - 360481
- Antique Brass
Part No:Â 360481
T-Strike for Roller Catch
Plate Length: 2-3/4 inch
Plate Width: 1-1/8 inch
Material: Solid Brass
from $9.49
3-5/16" Heavy Duty Roller Catch - 360480
- Polished Chrome
Part No:Â 360480
3-5/16'' Heavy Duty Roller Catch
Packed with Strike Plate and matching screws
from $40.48
Strike Plate For Drive In Ball Catch - 360102
- Antique Brass
Part No:Â 360102
Strike Plate For Drive in Ball Catch
Full Lip Strike Plate for Ball Catch #360100
2-1/8 in. x 1-3/8 in.
Available in Several Finishes
from $4.43
Sold Out
2-1/4 Roller With Full Lip Strike - 360441
This items is discontinued and no longer available for purchase.
Part No:Â 360441
$1.25
Sale
2-1/2" Flush Magnetic Door Holder - 361001
- Oil Rubbed Bronze
Part No:Â 361001
Flush Magnetic Door Holder
2-1/2 inch diameter
3/4 inch width
1 inch projection
Solid Brass construction
Some finishes cost more than others.
$56.93
from $49.34
Sale
Magnetic Door Holder - 361004
Discontinued, limited to existing inventory. Part Number:Â 361004 Magnetic Door Holder - Choose Color Includes one holder, one retainer, and screws. Plastic housing with magnetic insert. May be wall or floor mounted. Spring loaded retainer mounts to door. Available in Ivory,...
$7.88
$5.95
Top Brands
