Marvin Elevate 300 Series Adjustable door hinge 3-5/8 x 4, Right Hand
All in one door hinge with vertical and horizontal adjustment. Used by several door companies including Marvin on their Elevate hinged door.
Hinge Type: Adjustable, All in one, Vertical and Horizontal
Width: 4 inches when open
Height: 3-5/8 inch
Thickness: 5/8 outer edge with 7/8 center at adjustment screw
Adjustment: 1/4 inch vertical and Horizontal
Adjustment Tool: 5/32 Hex head wrench
Handed: Yes, left or right hand for In swing and Out swing doors. ( See Handing Chart )
Substrates: Brass or Steel
Color / Finishes: Standard & Powder Coat
Priced and sold as each
NOTE: Original Integrity hinge used from 1999 - 03/01/2004
Current style needs to be mortised into door - see instructions
Door Units produced before 6/26/2017:
Additional Information:
3 hinge for frame height <82 inches and 4 hinge for frame height > than 82 inches
Available Finishes: Polished Chrome, Satin Chrome, Antique Brass, Bright Brass, Oil Rubbed Bronze, Satin Nickel, Brass PVD, and many other industry standard powder paint colors available special order
Matching mounting screws available
Hinge Replacement and Adjustment:
Replacement:
* Outswing doors normally use a gasket on the frame hinge
1. Open Door to 90 degrees or greater to access hinges.
2. Use blocking under door panel to remove tension / weight on hinges
3. Start by removing bottom hinge.
4. Replace New hinge and install screws four #8 x 1-1/2 screws in door panel
5. Install four #8 x 5/8 screws in door frame.
6. Continue from bottom to top till all hinges are replaced.
7. The hinge should be flush with the door panel and the frame.
8. Close door and inspect the reveal between door panel and frame.
Adjustment:
* You want an even Reveal (gap) between door panel and frame, top and sides.
* Vertical Adjustment is from the bottom of the Set hinge
* Horizontal adjustment is from the center of the Guide hinge
1. Adjust the Vertical set hinge using a 5/32 Hex / Allen wench., The gap at the top of the door is normally about 1/8-3/16 inch
2. Open Door and Adjust the Horizontal guide hinge to move the panel closer or further away from the frame.
3. Close door and inspect reveal, it might take several tries to get the reveal correct.
4. If door swings properly and the reveals are correct. Open door and remove the inner #8 x 5/8 screws from the frame side, top hinge, and install a longer 2-3 inch screw that will go thru the frame and connect with the wall stud. Additional long screws can be used if desired.
* The longer screw will help keep the door square to the frame, reduce sagging and add strength to the hinge side of the door.
Return and Refund Policy
Thank you for shopping at Golden Locks Inc.
If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.
The following terms are applicable for any products that You purchased with Us.
Return, Cancellation & Special Order Policy
Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.
Order Changes & Cancellation Policy :
• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.
Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)
• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded.
Standard Return Policy (Stock Items Only)
• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.
Non-Returnable Products
• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed
• Clearance or discounted items
• Items showing signs of installation
Shipping Claims (Damage or Missing Items)
• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.
Chargebacks & Payment Disputes
• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.
Return Authorization Required
• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.
Product Page Notice (Recommended)
• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.
Contacting Us
Please contact us with as much information about your return request as possible. We will need:
- Your order ID.
- First and last name.
- Phone number : +1-800-385-7725
- The items you wish to return (if your order contains multiple items.)
- The reason for your return.
- Any relevant return details or images.
- By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us
Not providing this information may delay your return.
Please email us at CS@GoldenLocksinc.com to authorize a return.
Return Address
Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States
