Hoppe Mortise Lock, 16mm 70/92 Single Point Lock (SPL) 1" Deadbolt, ne – Golden Locks Inc .

Hoppe Mortise Lock, 16mm 70/92 Single Point Lock (SPL) 1" Deadbolt, new style Rotation Limiter

HOPPE
HOPPE Single Point Mortise Locks
$175.00 $116.65
Door Handing
IMPORTANT NOTICE: This Single Point Mortise Lock can NOT be used to repair a multipoint lock
There are no interchangeable parts from this lock that can be used on other locks.

Hoppe manual single point mortise lock (SPL)
Used by Caradco, Norco, WeatherShield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.

16mm Hoppe 70/92 Single Point Lock (SPL) 1" Deadbolt, new style with locking handle
Deadbolt Throw: 1 inch (25 mm)
Face Plate Width: 5/8 inch (16 mm)
Face Plate Length: 10-13/16 inches
Faceplate Screw Holes: 10-1/8 inches
Faceplate Material: Stainless Steel
Backset: 2-3/4 inches (70 mm) - distance from edge of face plate to center of lock handle

All Current Model Single Point Locks from HOPPE w/ Rotation Limiter
(Lever is fixed and does not move after door is locked)
11517463 - 35mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends
11517475 - 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
11517487 - 45mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends
11517499 - 45mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
11517505 - 60mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
11517517 (this listing) - 70mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
11517529 - 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with square ends

(Please contact office if needing one of the locks not currently linked to our site) Latch handing may be changed by pulling out or inserting small screwdriver into small hole in back of latch and pushing forward, twist latch and release. See linked article below.

HOPPE Screws for Installation:
8785695 - Screw 1-3/8" ( 35mm ) 8mm Head - Stainless Steel
8785687 - Screws, 3/4" (20mm ) 8mm Head - Stainless Steel


Helpful Articles
How To Drill Out A HOPPE Mortise Lock If The Dead Bolt Doesn't Retract
How to Change the Handing (Reverse the Slope of the Latch) on a HOPPE Lock

Return and Refund Policy

Thank you for shopping at Golden Locks Inc.

If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.

The following terms are applicable for any products that You purchased with Us.

Return, Cancellation & Special Order Policy

Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.

Order Changes & Cancellation Policy :

• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.

Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)

• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded. 

Standard Return Policy (Stock Items Only)

• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.

Non-Returnable Products

• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed

• Clearance or discounted items
• Items showing signs of installation

Shipping Claims (Damage or Missing Items)

• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.

Chargebacks & Payment Disputes

• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.

Return Authorization Required

• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.

Product Page Notice (Recommended)

• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.

Contacting Us

Please contact us with as much information about your return request as possible. We will need:

  • Your order ID.
  • First and last name.
  • Phone number : +1-800-385-7725
  • The items you wish to return (if your order contains multiple items.)
  • The reason for your return.
  • Any relevant return details or images.
  • By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us

Not providing this information may delay your return.

Email

Please email us at CS@GoldenLocksinc.com to authorize a return.

Return Address

Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States

Hoppe Mortise Lock, 16mm 70/92 Single Point Lock (SPL) 1" Deadbolt, new style Rotation Limiter
You have successfully subscribed!
This email has been registered