HOPPE 3-POINT MULTIPOINT LOCK, DOOR HEIGHTS 76.61"- 80.56", 1-3/8" BAC – Golden Locks Inc .

HOPPE 3-POINT MULTIPOINT LOCK, DOOR HEIGHTS 76.61"- 80.56", 1-3/8" BACKSET, SHOOTBOLT VERSION

Hoppe
MULTIPOINT LOCKS
$295.00
Door Handing

Part Number: 49902-1635SB-01-KIT

Replacement Kit for a variety of Discontinued Multipoint locks on doors with Fuhr, Roto or other brands that are not available.
Please confirm all measurements to be sure this is the correct replacement for your door.
You will need to be familiar with all terms listed.
You can find them in the Multipoint Lock Glassary of Terms

Specifications:
Faceplate Width: 5/8 inch (16mm)
Backset: 1-3/8 inch (35mm)
Handle to Cylinder PZ: 3-5/8 inch (92mm)
Deadbolt Throw: 1 inch (25.4mm)
Handle Height: 36 inch ( 914mm)
Overall Length: Doors 76.61 - 80.56 inch (1946-2046mm)
Croppable: Yes, Max cutoff from top extension 3.94 inch (10mm)

Kit Contents:
8778335 - 16mm Manual Gear, 35/92 Shootbolt, D/B 1 inch (25.4mm), HH 36 inch (914mm)
8778691 - 16mm Manual Middle Extension, Shootbolt 27.20 (691mm) length
8778611 - 16mm Manual Top Extension, Shootbolt 15.75 (400mm) length
2875118 - Cover Plate - Shootbolt Extension Connection - Stainless Steel
8785695 - Installation Screws, 1-3/8 Length (35mm) - Stainless Steel

Optional Related Parts:
2098911 - Flat Shootbolt Strike - Stainless Steel
2024962 - Socket Strike, 1 inch (24.9mm) Throw - Brass
1963554 - Latch & Deadbolt, Curved Strike Plate, 1-3/4" (45mm) door - Stainless Steel
2342311 - Latch & Deadbolt Strike Plate, Flat 1-3/4" (45mm) door - Stainless Steel
8786547 - Dust cap for strike plate, Black Plastic

INSTALLATION NOTE: Cutting to length
1. Lay the old lock and new lock side by side to get length.
2. The top shootbolt extension has serrated teeth, the middle extension has a receptacle (coupler) for the teeth to fit into. Mark the Top extension for proper length.
3. Extend the top bolt before cutting.
4. With the shootbolt extended (locked position), using a hacksaw, cut off the same amount from the front (smooth side) and back side of the mechanism ( serrated teeth).
5. You want as many teeth to fit into the receptacle as possible, gap between serrated ends must be less than 3 teeth
6. Install cover plate to reinforce connection between middle and upper shootbolt extension.
7. Test operation of door BEFORE closing. The small Mishanding latch must be depressed to operate lock.

Operation: Manual Function
To lock door, Lift handle and then turn thumb turn or Key to extend deadbolt
To unlock door, Turn Thumb-turn or key and then depress lever.

To Change Handling / Reversing Latch
Latch handing may be changed by inserting a small screwdriver into the small hole in back of latch and pushing forward.
Twist latch and release.

Return and Refund Policy

Thank you for shopping at Golden Locks Inc.

If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.

The following terms are applicable for any products that You purchased with Us.

Return, Cancellation & Special Order Policy

Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.

Order Changes & Cancellation Policy :

• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.

Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)

• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded. 

Standard Return Policy (Stock Items Only)

• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.

Non-Returnable Products

• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed

• Clearance or discounted items
• Items showing signs of installation

Shipping Claims (Damage or Missing Items)

• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.

Chargebacks & Payment Disputes

• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.

Return Authorization Required

• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.

Product Page Notice (Recommended)

• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.

Contacting Us

Please contact us with as much information about your return request as possible. We will need:

  • Your order ID.
  • First and last name.
  • Phone number : +1-800-385-7725
  • The items you wish to return (if your order contains multiple items.)
  • The reason for your return.
  • Any relevant return details or images.
  • By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us

Not providing this information may delay your return.

Email

Please email us at CS@GoldenLocksinc.com to authorize a return.

Return Address

Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States

HOPPE 3-POINT MULTIPOINT LOCK, DOOR HEIGHTS 76.61"- 80.56", 1-3/8" BACKSET, SHOOTBOLT VERSION
You have successfully subscribed!
This email has been registered