G-U / Ferco SECURY 50/92 Automatic Door Lock 8-0 Door for LEVER Handles - Stainless Steel
SKU: 6-36033-02-R-SS
G-U / Ferco SECURY 3-Point Automatic latching with 1 deadbolt and 2 Latchbolts Used with Lever type handles.
Simply Close the Door!
As soon as the door pulled shut, the Automatic latchbolts instantly throw 20mm and are secured to prevent them being forced back. By turning the key or the knob, it will engage the deadbolt and lock the top and bottom latchbolts to become a 3 dead bolt locking system.
Specifications:
- Backset: 2 inch (50mm)
- Cylinder Position: Key Above Lever
- Cylinder Type: American (uses flat tail piece)
- Faceplate Width: 5/8 inch (16mm)
- Extension End: Radius, Rounded end
- Overall Length 8-0 Door: 74-27/32 inch (1901mm) 74.84 inch
- Upper Latchbolt: 43-3/8 inch (1102mm) 43.39 inch
- Lower Latchbolt: 21-3/8 inch (543mm) 21.38 inch
- Handle Height: Adjustable
- Deadbolt Throw: 1 inch (24.9mm) 0.984 inch
- Latchbolt Length: 3/4 inch (20mm) 0.787 inch
- Handle to Cylinder PZ: 3-5/8 inch (92mm) 3.62 inch
- Spindle Hub: 5/16 inch (8mm) 0.315 inch Square
- Material: Stainless Steel
- Hardware Trim: Levers only
Additional information :
-3-point, one piece locking system for 6' 8'' and 8' doors
-Heavy duty mortise construction with reinforced lever return spring system
-Locking by US-cylinder with 90 degrees turn of key or thumb-turn
-No lifting of handle to engage locking points
-Top and bottom Automatic latchbolts projection from 10 to 20mm:
- provide security against forced entry
- help prevent air infiltration from gasket
- protect the door panel from warping
-1'' (25mm) throw on deadbolt with baby sitting function
-Non handed, latch easily reversible
-Handle height variable (36'' recommended)
-16mm stainless steel faceplate with radius ends for easy installation and cleaner look
-Same hardware groove detail throughout our entire door lock program (jig, router base and bits available)
-Extension with additional lock point is available for doors taller than 8' (6-33479-04-0-8B)
-To be used with lever handle set (US-cylinder above handle).
Return and Refund Policy
Thank you for shopping at Golden Locks Inc.
If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.
The following terms are applicable for any products that You purchased with Us.
Return, Cancellation & Special Order Policy
Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.
Order Changes & Cancellation Policy :
• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.
Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)
• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded.
Standard Return Policy (Stock Items Only)
• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.
Non-Returnable Products
• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed
• Clearance or discounted items
• Items showing signs of installation
Shipping Claims (Damage or Missing Items)
• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.
Chargebacks & Payment Disputes
• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.
Return Authorization Required
• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.
Product Page Notice (Recommended)
• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.
Contacting Us
Please contact us with as much information about your return request as possible. We will need:
- Your order ID.
- First and last name.
- Phone number : +1-800-385-7725
- The items you wish to return (if your order contains multiple items.)
- The reason for your return.
- Any relevant return details or images.
- By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us
Not providing this information may delay your return.
Please email us at CS@GoldenLocksinc.com to authorize a return.
Return Address
Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States
