Hoppe Mortise Lock, 16mm 70/92 Single Point Lock (SPL) 1" Deadbolt, ne – Golden Locks Inc .

Hoppe Mortise Lock, 16mm 70/92 Single Point Lock (SPL) 1" Deadbolt, new style Rotation Limiter

HOPPE
HOPPE Single Point Mortise Locks
$87.86
Door Handing
IMPORTANT NOTICE: This Single Point Mortise Lock can NOT be used to repair a multipoint lock
There are no interchangeable parts from this lock that can be used on other locks.

Hoppe manual single point mortise lock (SPL)
Used by Caradco, Norco, WeatherShield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.

16mm Hoppe 70/92 Single Point Lock (SPL) 1" Deadbolt, new style with locking handle
Deadbolt Throw: 1 inch (25 mm)
Face Plate Width: 5/8 inch (16 mm)
Face Plate Length: 10-13/16 inches
Faceplate Screw Holes: 10-1/8 inches
Faceplate Material: Stainless Steel
Backset: 2-3/4 inches (70 mm) - distance from edge of face plate to center of lock handle

All Current Model Single Point Locks from HOPPE w/ Rotation Limiter
(Lever is fixed and does not move after door is locked)
11517463 - 35mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends
11517475 - 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
11517487 - 45mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends
11517499 - 45mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
11517505 - 60mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
11517517 (this listing) - 70mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends
11517529 - 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with square ends

(Please contact office if needing one of the locks not currently linked to our site) Latch handing may be changed by pulling out or inserting small screwdriver into small hole in back of latch and pushing forward, twist latch and release. See linked article below.

HOPPE Screws for Installation:
8785695 - Screw 1-3/8" ( 35mm ) 8mm Head - Stainless Steel
8785687 - Screws, 3/4" (20mm ) 8mm Head - Stainless Steel


Helpful Articles
How To Drill Out A HOPPE Mortise Lock If The Dead Bolt Doesn't Retract
How to Change the Handing (Reverse the Slope of the Latch) on a HOPPE Lock

Return and Refund Policy

Last updated: December 10, 2021

Thank you for shopping at Golden Locks Inc.

If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.

The following terms are applicable for any products that You purchased with Us.

Interpretation and Definitions

Interpretation

The words of which the initial letter is capitalized have meanings defined under the following conditions. The following definitions shall have the same meaning regardless of whether they appear in singular or in plural.

Definitions

For the purposes of this Return and Refund Policy:

  • Company (referred to as either "the Company", "We", "Us" or "Our" in this Agreement) refers to Golden Locks Inc, 16582 Gothard Street Suite E Huntington Beach CA 92647..

  • Goods refer to the items offered for sale on the Service.

  • Orders mean a request by You to purchase Goods from Us.

  • Service refers to the Website.

  • Website refers to Golden Locks Inc, accessible from https://goldenlocksinc.com/

  • You means the individual accessing or using the Service, or the company, or other legal entity on behalf of which such individual is accessing or using the Service, as applicable.

Your Order Cancellation Rights

You are entitled to cancel Your Order within 14 days without giving any reason for doing so.

The deadline for cancelling an Order is 14 days from the date on which You received the Goods or on which a third party you have appointed, who is not the carrier, takes possession of the product delivered.

In order to exercise Your right of cancellation, You must inform Us of your decision by means of a clear statement. You can inform us of your decision by:

We will reimburse You no later than 14 days from the day on which We receive the returned Goods. We will use the same means of payment as You used for the Order, and You will not incur any fees for such reimbursement.

Conditions for Returns

In order for the Goods to be eligible for a return, please make sure that:

  • The Goods were purchased in the last 14 days
  • The Goods are in the original packaging

The following Goods cannot be returned:

  • The supply of Goods made to Your specifications or clearly personalized.
  • The supply of Goods which according to their nature are not suitable to be returned, deteriorate rapidly or where the date of expiry is over.
  • The supply of Goods which are not suitable for return due to health protection or hygiene reasons and were unsealed after delivery.
  • The supply of Goods which are, after delivery, according to their nature, inseparably mixed with other items.

We reserve the right to refuse returns of any merchandise that does not meet the above return conditions in our sole discretion.

Only regular priced Goods may be refunded. Unfortunately, Goods on sale cannot be refunded. This exclusion may not apply to You if it is not permitted by applicable law.

Returning Goods

You are responsible for the cost and risk of returning the Goods to Us. You should send the Goods at the following address:

16582 Gothard Street Suite E Huntington Beach CA 92647

We cannot be held responsible for Goods damaged or lost in return shipment. Therefore, We recommend an insured and trackable mail service. We are unable to issue a refund without actual receipt of the Goods or proof of received return delivery.

Gifts

If the Goods were marked as a gift when purchased and then shipped directly to you, You'll receive a gift credit for the value of your return. Once the returned product is received, a gift certificate will be mailed to You.

If the Goods weren't marked as a gift when purchased, or the gift giver had the Order shipped to themselves to give it to You later, We will send the refund to the gift giver.

Contact Us

If you have any questions about our Returns and Refunds Policy, please contact us:

[time] , [location]
Hoppe Mortise Lock, 16mm 70/92 Single Point Lock (SPL) 1" Deadbolt, new style Rotation Limiter
You have successfully subscribed!
This email has been registered