HLS7 16mm Active Gear, 45/92, LH Tongue @ 24.41 Hoppe Part #2661101
Handing can be changed if needed.
Hoppe Series: HLS 7 (one motion retracts deadbolt with turn of handle)
Hoppe Version: Tongue @ 24.41" (620mm)
Backset: 1-3/4 inch ( 45mm) - Only one available
Handing: Left Hand
Spindle Hub Diameter: : 5/16 inch (8mm)
Spindle hub has a blocker and uses 1/2 spindles attached to handle set
Handle Height: 36 inch (914mm)
This MPL has a Panic release function on the inside
From inside to exit the locked door, push down on lever and the deadbolt and latch will retract.
Operation of Lock
To Lock door
1. Turn thumb turn to horizontal position or key to locked position
2. Lift handle and deadbolt will extend ( outside is locked )
To Unlock door from Inside
1. Depress Lever, latch and deadbolt will retract. Thumbturn rotates back to vertical position automatically
To Unlock door from Outside
1. Insert key and turn
2. Depress lever to open door
NOTE 1: This is the bottom 1/2 of MP Lock system - Top extension is determined by door height and Tongue Position
Panic Function
This lock has a panic release function for Egress. One side of the lock is always locked, One side has the Panic Function.
The spring latch can be pulled our to reverse.
If panic function is on wrong side of lock, it can be changed - See Note 3 & Directions on Image
Handing:
Door handing is always determined from the exterior (outside)
When hinges are on the left, the door is a Left (LH)
When hinges are on the Right, the door is a Right (RH)
Inswing or outswing does not determine handing.
Proper Alignment
The “half-moon” slot next to the handle hub must have the nub in the 3 o’clock or 9 o’clock position (depending on the side of the gear box you’re on).
If it isn’t, the gear will not work.
The handle set, with spring assist, naturally moves this to the proper position when installed in the door.
When out of the door, we have to make sure it is lined up.
Return and Refund Policy
Thank you for shopping at Golden Locks Inc.
If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.
The following terms are applicable for any products that You purchased with Us.
Return, Cancellation & Special Order Policy
Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.
Order Changes & Cancellation Policy :
• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.
Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)
• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded.
Standard Return Policy (Stock Items Only)
• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.
Non-Returnable Products
• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed
• Clearance or discounted items
• Items showing signs of installation
Shipping Claims (Damage or Missing Items)
• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.
Chargebacks & Payment Disputes
• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.
Return Authorization Required
• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.
Product Page Notice (Recommended)
• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.
Contacting Us
Please contact us with as much information about your return request as possible. We will need:
- Your order ID.
- First and last name.
- Phone number : +1-800-385-7725
- The items you wish to return (if your order contains multiple items.)
- The reason for your return.
- Any relevant return details or images.
- By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us
Not providing this information may delay your return.
Please email us at CS@GoldenLocksinc.com to authorize a return.
Return Address
Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States
