Hoppe Multipoint Lock, 1-3/8" backset, Manual 2 rollers Bottom @ 29.53 – Golden Locks Inc .

Hoppe Multipoint Lock, 1-3/8" backset, Manual 2 rollers Bottom @ 29.53" & Top @ 50.59

HOPPE
MULTIPOINT LOCKS
$284.58
Door Handing

This HOPPE multipoint lock replaces both automatic and manual versions of FUHR 93 inch 2-roller multipoint locks (replaces parts # 499010399 & 499010699)

HOPPE Replacement Kit for a variety of Multipoint locks on doors with Old Hoppe, Fuhr, Roto, Weather Shield or other brands that may not be available.

Please confirm all measurements to be sure this is the correct replacement for your door.

The kit includes bottom gear, top extension and stainless steel screws

 

PLEASE REVIEW ALL IMAGES FOR IMPORTANT DETAILS.

Please review all images for important details, You  need to be familiar with all terms

 

Specifications:

Lock Type: Manual, Two Roller

Faceplate Width: 5/8 inch (16mm)

Backset: 1-3/8 inch (35mm)

Handle to Cylinder PZ: 3-5/8 inch (92mm)

Deadbolt Throw: 1 inch  (25.4mm)

Handle Height: 36 inch ( 914mm) 

Top Roller Position: 50.59 inch ( 1285mm)

Bottom Roller Position: 29.53 inch ( 750mm)

Note: Rollers are measured with rollers in locked position

Overall Length: Doors 89.76 - 99.41 (2280 - 2525mm)

Croppable: Yes, Max cutoff from top extension 2.36 inch (60mm)

Note: This multipoint lock can be trimmed for different height doors.

 

Kit Contents: 

8778255 - 5/8 wide faceplate,  Manual Gear, 1-3/8" backset, Bottom Roller @ 29.53",  1" D/B

8778491 - 5/8 wide faceplate, Top Extension, Roller @ 50.59" (1285mm) Length  61.81" (1570mm)  

8785695: Installation Screws, 1-3/8 Length (35mm) - Stainless Steel (20)

 

Optional Related Parts: 1-3/4" Door - Stainless Steel

8783867 - Auto-Release Strike Plate - Brass    

8783871 - Auto-Release Strike Plate - Nickel    

8784775 - Underplate for Auto Release - Brass

8784783 - Underplate for Auto Release -Nickel

8785003 - Roller Strike Plate - Brass     

8784999 - Roller Strike Plate - Nickel  

        

1963554 - Latch & Deadbolt Strike Plate, Curved 1-3/4" (45mm) door - Stainless Steel

2342311 - Latch & Deadbolt Strike Plate, Flat 1-3/4" (45mm) door - Stainless Steel

8786547 - Dust cap for strike plate

 

INSTALLATION NOTE: Cutting to length

1. Attach top extension to lower assembly

2. Lay the old lock and new lock side by side to get length.

3. The top extension is longer than needed,  Mark the Top extension for proper length.

4. Using a hacksaw cut excess from top of extension

5. Install complete lock, be sure the handle height is the same as before

6. Test operation of door BEFORE closing. The small Mis-handing latch must be depressed to operate lock.

 

Operation: Manual Function

To lock door, Lift handle and then turn thumb turn or Key to extend deadbolt 

To unlock door, Turn thumb turn or key and then depress lever.

 

To Change Handling / Reversing Latch

Latch handing may be changed by inserting small screwdriver into small hole in back of latch and pushing forward, Twist latch and release.  See additional pictures.

 

NOTE 1: Lock will have to be trimmed on bottom due to difference in handle height of new and old locks; top will be trimmed on top as well, to fit your specific door height.

NOTE 2: Replacement process may involve modification to door jamb-- roller strikes may need to be moved up or down in door jamb.

For replacement instructions, read: Replacing FUHR roller multipoint lock with HOPPE roller lock

Additional Resources:
How to change handing on HOPPE multipoint lock: Written Article | Video
Article: How to change direction of mishandling device on HOPPE lock
Video: How to Connect a Top Extension to HOPPE Lockbox

Return and Refund Policy

Thank you for shopping at Golden Locks Inc.

If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.

The following terms are applicable for any products that You purchased with Us.

Return, Cancellation & Special Order Policy

Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.

Order Changes & Cancellation Policy :

• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.

Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)

• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded. 

Standard Return Policy (Stock Items Only)

• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.

Non-Returnable Products

• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed

• Clearance or discounted items
• Items showing signs of installation

Shipping Claims (Damage or Missing Items)

• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.

Chargebacks & Payment Disputes

• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.

Return Authorization Required

• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.

Product Page Notice (Recommended)

• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.

Contacting Us

Please contact us with as much information about your return request as possible. We will need:

  • Your order ID.
  • First and last name.
  • Phone number : +1-800-385-7725
  • The items you wish to return (if your order contains multiple items.)
  • The reason for your return.
  • Any relevant return details or images.
  • By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us

Not providing this information may delay your return.

Email

Please email us at CS@GoldenLocksinc.com to authorize a return.

Return Address

Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States

Hoppe Multipoint Lock, 1-3/8" backset, Manual 2 rollers Bottom @ 29.53" & Top @ 50.59
You have successfully subscribed!
This email has been registered