Atrium Mulitpoint Lock Ferco 528 Replacement 5-Pt Lock; Multi Point Lo – Golden Locks Inc .

Atrium Mulitpoint Lock Ferco 528 Replacement 5-Pt Lock; Multi Point Lock Conversion Kit

G-U / FERCO
Multipoint Locks
$290.00 $249.00
Door Handing

ATRIUM MULITPOINT LOCK FERCO 528 REPLACEMENT 5-PT LOCK; MULTI POINT LOCK CONVERSION KIT.

  • Part No: 4990475-KIT.

This is a REPLACEMENT Ferco 528 Lock - Read all Info, locks have changed
Used in an Atrium door to replace the Old- Style Ferco Lock, which was discontinued

This lock fits the standard door - up to 81 inches tall
If your door is taller, you will need an extension 40325 - Extension Length: 19-5/8 inches (500mm)

Lock Type: Ferco 4 point lock - 2 Roller with 2 Shootbolts
Overall Length: 76-7/16 Long - Original atrium door
Backset: 1-1/8 (28mm) from edge of faceplate, to center of handle
Lock case: 7-3/4 x 1-3/4
Spindle Size: 1/4 x 4-5/8 inch (7mm Square)
Ferco Face plate: 5/8 inch (16mm) wide, has G15371.19 stamped midway from bottom of door to lock (528 ID's the faceplate & backset)
Handle Spacing: 2-3/4 (70mm) from center of thumb turn to Center of handle.
Handle Height: 35 inches
Bottom Roller Position: 11 inches unlocked, 11-5/8 Locked
Top Roller Position: 16-1/2 inches unlocked, 17-1/8 Locked
(Roller moves 5/8 inch between being locked or unlocked)
Measurements are from center of handle to center of roller

NEW ATRIUM / FERCO REPLACEMENT REQUIRES MODIFICATION:
You will need to cut the main lock for height, as needed before attaching shootbolt extensions.
The new lock comes with a 1/4 inch (7mm) spindle ( yours is 5/16 (8mm) and a Brass Sleeve
You may need to cut the new spindle to length and cut the brass sleeve in half to retrofit your old handles.
If you need the new sleeve and spindle - install handles and remove set screw - drill into brass sleeve and into spindle, reinstall set screw - this will secure handles
1. Rods Need to be cut to length.
2. New 7mm spindle to retrofit existing handles with 8mm hole.
3. The roller cams DO NOT align with existing strikes, they must be relocated.
Roller cams from center of cam to top of spring latch: 14 inches from top 12.5 inches from bottom
Note:To remove rollers grind rivet on back side flush with bar, Install lock and then break off roller.
If the roller is removed first the parts flop around.
4. The spring latch is handed, and can be reversed.
5. NO Deadbolt, Spring Latch onlyInstallation 


RELATED Atrium / FERCO 528 Parts & Hardware:
40027- Handleset to be used with this lock
40325 - Ferco 19-5/8 inch (500mm) Extension for doors greater than 81 inches tall
E-91440-00-0-0 - Reducing sleeve only; 7mm - 8mm
9-26874-56-0-1 - 7mm/118mm (1/4" x 4-5/8") Square Spindle

Customer Reviews

Based on 2 reviews Write a review

Return and Refund Policy

Thank you for shopping at Golden Locks Inc.

If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.

The following terms are applicable for any products that You purchased with Us.

Return, Cancellation & Special Order Policy

Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.

Order Changes & Cancellation Policy :

• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.

Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)

• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded. 

Standard Return Policy (Stock Items Only)

• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.

Non-Returnable Products

• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed

• Clearance or discounted items
• Items showing signs of installation

Shipping Claims (Damage or Missing Items)

• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.

Chargebacks & Payment Disputes

• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.

Return Authorization Required

• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.

Product Page Notice (Recommended)

• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.

Contacting Us

Please contact us with as much information about your return request as possible. We will need:

  • Your order ID.
  • First and last name.
  • Phone number : +1-800-385-7725
  • The items you wish to return (if your order contains multiple items.)
  • The reason for your return.
  • Any relevant return details or images.
  • By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us

Not providing this information may delay your return.

Email

Please email us at CS@GoldenLocksinc.com to authorize a return.

Return Address

Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States

Atrium Mulitpoint Lock Ferco 528 Replacement 5-Pt Lock; Multi Point Lock Conversion Kit
You have successfully subscribed!
This email has been registered