20mm ESSVE P2000 Pease Door 6-8 Replacement, 60/92 for 55/92 68" Hook Version
Backset: 2-3/16 inch (55mm) MOST PEASE DOORS
Faceplate Width: 3/4 inch ( 20mm)
Overall faceplate length: 68 inches (1727mm) with radius ends.
Lower Gear Assembly, Lower Hook @ 26"
Upper Extension with Hook @ 32-3/4"
Bore Diameter in door: 1 inch to 2-1/8 inch, most were 2-1/8 inch
Pease Replacement Kit, Custom for 80 inch 6-8
Backset: 2-3/8 inch (60mm) (Deeper by 3/16")
Faceplate Width: 3/4 inch (20mm)
Overall faceplate length: 68-1/8 inches, square ends (1/8" Longer)
Lower Gear Assembly, Lower Hook @ 26"
Upper Extension with Hook @ 32-3/4"
Stainless Steel Installation Screws
Overall Length when assembled - 68-1/8 inch with square corner ends
Our custom replacement 4990613 has a 2-3/8" (60mm) backset, yours is 2-3/16" (55mm).
When using the lock with 2-3/8 backset, your handle set will shift 3/16 away from the edge of the door and leave a Paint / Stain
line and most likely an impression in the door from the original plate.
Most Pease Handle sets will not work with the replacement lock.
Pease used 2 different width Handle set plates and 2 different size holes in door.
If your escutcheon plate is only 1-5/8 wide, then a new handle set trim with a 2 x 12 plate, like our or 395009 will cover the old
marks and work with the new custom multipoint lock.
If your door has a cross bore of 2-1/8 inch wide and the trim plates are 2-3/8 inches wide you will need a plate under the trim to
cover the large hole OR new handle set with a plate width of 2-1/2 inches wide or larger.
Replacement 3-point Lock Operation:
To Change Handing / Latch Reversal:
1. Lift Lever to extend deadbolt and hooks
2. Pull spring latch out, rotate latch to correct position
3. Check function of lock before closing door
To Lock door:
Lift the handle to extend locking points and turn thumbturn or key to secure in locked position.
When the Lever is lifted the Deadbolt and hooks are fully extended.
This lock has a mis-handing latch that needs to be pushed in to function. (see additional pictures above)
Please contact our office with any questions or concerns.
Return and Refund Policy
Thank you for shopping at Golden Locks Inc.
If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.
The following terms are applicable for any products that You purchased with Us.
Return, Cancellation & Special Order Policy
Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.
Order Changes & Cancellation Policy :
• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.
Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)
• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded.
Standard Return Policy (Stock Items Only)
• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.
Non-Returnable Products
• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed
• Clearance or discounted items
• Items showing signs of installation
Shipping Claims (Damage or Missing Items)
• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.
Chargebacks & Payment Disputes
• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.
Return Authorization Required
• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.
Product Page Notice (Recommended)
• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.
Contacting Us
Please contact us with as much information about your return request as possible. We will need:
- Your order ID.
- First and last name.
- Phone number : +1-800-385-7725
- The items you wish to return (if your order contains multiple items.)
- The reason for your return.
- Any relevant return details or images.
- By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us
Not providing this information may delay your return.
Please email us at CS@GoldenLocksinc.com to authorize a return.
Return Address
Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States
