A9800EO
MUST ORDER TRIM SEPARATELY
Suggested Architect's Specifications
- All exit devices shall be of touch bar design with smooth operation and be operative over ⅔ of the door's clear opening width
- All exit devices must be listed under "Panic Hardware" in the Accident Equipment List of Underwriters' Laboratories, Inc. Where labeled doors are used as exits, they must be equipped with labeled Fire Exit Hardware and UL10C, UBC 7-2-1997 codes.
- All springs shall be of stainless steel throughout.
- All exit devices shall be of chassis mounted unit construction.
- All exit devices shall be ANSI A156.3, Grade 1.
Features & Construction
- For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement.
- ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs.
- Rail assemblies and end caps are brass, bronze or stainless steel and rail travels in direction of the door swing.
- Trims are thru bolted for additional security.
- Conforms & Meets ADA Regulations.
- UL Listed for Panic and ULC10C, UBC 7-2-1997 codes.
- UL Listed for Fire Exit Hardware. 3 hours.
- (A) label rating on pairs of doors up to 8'0" × 8'0" swinging in same or opposite directions.
- Uncompromising security and safety in single and double fire exit doors.
- Chassis mounted unit construction. Rim and vertical rod devices are nonhanded and easily reversible.
- Available in many different functions. Lever and escutcheon trims are Grade 1 construction with clutch on rose trims. Escutcheon trims are rigid and covers 161 cut out.
Alarm Exit Hardware
Features
- Alarm unit has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and breached.
- The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off.
- The key switch to turn the alarm off is a standard 1¼" cylinder with "C" keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal.
- Alarmed units are supplied with a switch that monitors push rail only.
- Unit includes "Emergency Exit Only. Alarm will sound." decal for application on door or unit.
Finishes
| CAL-ROYAL | DESCRIPTION | BHMA | US FINISH | MATERIAL |
|---|---|---|---|---|
| P | Primecoat | 600 | USP | Steel |
| 3 | Polished Brass, Clear Powder Coat | 605 | US3 | Brass |
| 4 | Satin Brass, Clear Powder Coat | 606 | US4 | Brass |
| 9 | Polished Bright Bronze | 611 | US9 | Bronze |
| 10 | Satin Bronze Clear Powder Coat | 612 | US10 | Bronze |
| 10B | Oil Rubbed Bronze | 613 | US10B | Bronze |
| 26 | Polished Bright Chrome | 625 | US26 | Brass |
| 26D | Satin Chrome | 626 | US26D | Brass |
| 32 | Polished Bright Stainless | 628 | US32 | Stainless Steel |
| 32D | Satin Stainless | 630 | US32D |
Stainless Steel |
Comparison Chart
| RIM EXIT DEVICE CONVERSIONS | RIM | VERTICAL ROD | RIM | VERTICAL ROD |
|---|---|---|---|---|
| ARROW | S1200 | S1100 | S3800 | S3700 |
| CAL-ROYAL | 2200 | 2260 | 9800 | 9860 |
| CORBIN/RUSSWIN | ED8200 | ED8400 | ED5400 | ED4750 |
| DETEX | V4000 | -- | 10 | 20 |
| DORMA | 8300 | 8400 | 9300 | 9400 |
| PRECISION | 5100 | 5200 | 2100 | 2200 |
| SARGENT | 2828 | 2727 | 8800 | 8700 |
| VON DUPRIN | 22 | 2227 | 98 | 9827 |
| YALE | 2100 | 2110 | 7100 | 7110 |
| RIM EXIT DEVICE CONVERSIONS | RIM | VERTICAL ROD | RIM | VERTICAL ROD |
|---|---|---|---|---|
| ARROW | -- | -- | 1800 | -- |
| CAL-ROYAL | 7700 | 7760 | 4400 | -- |
| CORBIN/RUSSWIN | -- | -- | ED6000 | -- |
| DETEX | -- | -- | -- | -- |
| DORMA | -- | -- | -- | -- |
| PRECISION | -- | -- | 100 | 200 |
| SARGENT | -- | -- | 9898 | -- |
| VON DUPRIN | 99 | 9927 | -- | -- |
| YALE | -- | -- | 1500 | 1510 |
9800 EXIT DEVICE TRIM OPTIONS:
Return and Refund Policy
Thank you for shopping at Golden Locks Inc.
If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.
The following terms are applicable for any products that You purchased with Us.
Return, Cancellation & Special Order Policy
Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.
Order Changes & Cancellation Policy :
• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.
Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)
• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded.
Standard Return Policy (Stock Items Only)
• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.
Non-Returnable Products
• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed
• Clearance or discounted items
• Items showing signs of installation
Shipping Claims (Damage or Missing Items)
• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.
Chargebacks & Payment Disputes
• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.
Return Authorization Required
• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.
Product Page Notice (Recommended)
• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.
Contacting Us
Please contact us with as much information about your return request as possible. We will need:
- Your order ID.
- First and last name.
- Phone number : +1-800-385-7725
- The items you wish to return (if your order contains multiple items.)
- The reason for your return.
- Any relevant return details or images.
- By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us
Not providing this information may delay your return.
Please email us at CS@GoldenLocksinc.com to authorize a return.
Return Address
Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States