20MM ADJUSTABLE 45/92 SHOOTBOLT REPLACEMENT, DOORS 94" - 107.5" – Golden Locks Inc .

20MM ADJUSTABLE 45/92 SHOOTBOLT REPLACEMENT, DOORS 94" - 107.5"

G-U / FERCO
MULTIPOINT LOCK
$429.00
Door Handing
Part Number: 499060021-KIT

Replacement Hardware for Old Style G-U 20/50/92 Shootbolt
The old style GU Shoot bolt MP lock had a 20mm faceplate, 50mm backset and 35" handle height.
The difference of the 50mm (1.97") and 45mm (1.77") backsets is slightly more than 3/16 inch
The latch and deadbolt of the new style are in different locations; about 1/4 - 3/8 inch difference.
See additional images for comparisons.

The strike will most likely not work as positioned. However, you have several options:
1. Best recommendation - Enlarge holes in strike to accommodate the new latch and deadbolt locations.
2. Move the new lock up 1/2” - 7/16” - Allows the strike to remain in place and bottom shoot bolt is adjustable, so that is not an issue.
This would change the handle height to 35-1/2” and may expose the screw holes from the old trim.
Holes can be covered by using the 2” x 12” trim plate (read below about for handle set replacement options).
3. Least recommended - Move strike - Not highly suggested since this leaves marks on jamb and is a problem for vinyl doors.

Amesbury P2000 Replacement Specifications:
Lock Case: P2000, American Cylinder version
Backset: 1-3/4 inch (45mm)
Faceplate: 25/32 Inch (20mm)
Faceplate color: Stainless Steel
Handle Height: Adjustable to fit 32" to 40" when used with bottom shoot bolt tip
Handle Location: Key Below Lever
Handle-Cylinder PZ: 3-5/8 inches (92mm)
Deadbolt throw: 1 inch (25.4mm)
Door Panel Height: Fits doors from 94" - 107.5"

Multipoint Lock replacement for single door:
804522948081LA - 20mm Gear, 45/92 Adjustable Handle Height (HH)
5670-80-81 - 20mm Shootbolt Tip for Top and Bottom (2)
20-2296 - 20mm Middle Shootbolt Extension - upper, Adjustable

To Change Handing / Latch Reversal:
1. Lift Lever to extend deadbolt and pull spring latch out
2. Rotate to correct position
3. Check function of lock before closing door

Optional Multipoint Lock Hardware Trim - Not included with Lock:
395007 - Traditional Arch Top, Keyed 2 x 12 plate
395009 - Modern Square top , Keyed 2 x 12 plate
Double doors could be a problem for this trim, no thumb turn on passive side.
Related Door Hardware with 35" handle Height: 68-81-1/2"
Kit # 499060019 - 20-2294 20mm Middle SB Extension, Doors 69-82.5"
Kit # 499060020 - 20-2295 20mm Middle SB Extension, Doors 81- 94.5"
Kit # 499060021 - 20-2296 20mm Middle SB Extension, Doors 94" - 107.5"

Return and Refund Policy

Thank you for shopping at Golden Locks Inc.

If, for any reason, You are not completely satisfied with a purchase We invite You to review our policy on refunds and returns.

The following terms are applicable for any products that You purchased with Us.

Return, Cancellation & Special Order Policy

Golden Locks Inc. sells professional door hardware, security products, and custom-configured items.
Due to the nature of these products, the following policies apply to all purchases made through our website or store. By placing an order with Golden Locks Inc., the customer agrees to the terms outlined below.

Order Changes & Cancellation Policy :

• Customers may request order changes, modifications, or cancellations within 24 hours of placingnan order.
• Requests must be submitted by email to CS@GoldenLocksinc.com.
• After 24 hours, the order may already be processed, allocated from inventory, submitted to thenmanufacturer, entered into production, or prepared for shipment.
• Orders canceled after 24 hours are subject to a minimum 25% restocking and processing fee.
• Golden Locks Inc. reserves the right to refuse cancellation if the order has already been shipped, manufactured, customized, cut, keyed, or assembled.

Custom Orders / Special Orders (Non-Cancelable & Non-Returnable)

• Many products sold by Golden Locks Inc. are custom-configured or special-ordered directly from manufacturers.
• Examples include Emtek configured hardware, Hoppe multipoint trim sets, special finish hardware, multipoint lock components, keyed cylinders, and custom door hardware configurations.
• Once these orders are submitted to the manufacturer, they cannot be canceled, returned, or refunded. 

Standard Return Policy (Stock Items Only)

• Return request must be submitted within 30 days of delivery.
• Product must be unused, uninstalled, and in original packaging.
• Approved returns are subject to a 25% restocking fee and deduction of original shipping costs.
• Customer is responsible for return shipping costs.

Non-Returnable Products

• Custom or special-order hardware
• Emtek configured products
• Hoppe trim sets and multipoint hardware
• Keyed locks or cylinders
• Cut keys
• Electronic locks once powered or installed
• Safes once delivered or installed

• Clearance or discounted items
• Items showing signs of installation

Shipping Claims (Damage or Missing Items)

• Customers must inspect shipments immediately upon delivery.
• Claims for damage, missing parts, or incorrect items must be reported within 48 hours of delivery.
• Customers must provide photos of the product, packaging, and shipping label.

Chargebacks & Payment Disputes

• Customers agree to the policies stated on this page when placing an order.
• Golden Locks Inc. may provide order confirmations, shipping confirmations, tracking information, and policy acceptance records to payment processors in the event of disputes.

Return Authorization Required

• All returns require a Return Merchandise Authorization (RMA).
• Unauthorized returns may be refused.

Product Page Notice (Recommended)

• This product may be custom ordered or configured to your specifications.
• Orders may only be canceled or modified within 24 hours.
• After 24 hours a 25% restocking fee applies.
• Custom and special-order items are non-cancelable and non-returnable once processed.

Contacting Us

Please contact us with as much information about your return request as possible. We will need:

  • Your order ID.
  • First and last name.
  • Phone number : +1-800-385-7725
  • The items you wish to return (if your order contains multiple items.)
  • The reason for your return.
  • Any relevant return details or images.
  • By visiting this page on our website: https://goldenlocksinc.com/pages/contact-us

Not providing this information may delay your return.

Email

Please email us at CS@GoldenLocksinc.com to authorize a return.

Return Address

Golden Locks Inc.
16371 Gothard Street, Suite G
Huntington Beach, CA 92647
United States

20MM ADJUSTABLE 45/92 SHOOTBOLT REPLACEMENT, DOORS 94" - 107.5"
You have successfully subscribed!
This email has been registered